Hi Om_p: Thanks for the hint. Yes, now I can see the action matching the description.
If I don't use a Basestation how can I view the packet from my PC host? I want to use RF230 sniffer but I am not quite sure about which channel TestNetwork app is using. Is it Ch 15? - David On Mon, Apr 12, 2010 at 1:22 PM, Omprakash Gnawali <gnaw...@cs.stanford.edu>wrote: > On Mon, Apr 12, 2010 at 9:11 AM, David Li <w.david...@gmail.com> wrote: > > Hi, > > > > I was trying to set up a CTP example using TestNetwork app. But the > > instructions in README is a little confusing to me. > > > > According to the README, I will need to install this app on two motes > which > > I did: > > > > "To test, start with two motes with no program that transmits > > packets. Example., erase the mote or install Blink. Program a mote with > > node id 0. The mote will toggle led1 (green on TelosB) approximately > > every 8s. Then program the second mote with id 1. Once programming is > > complete, the mote with id 0 will toggle led1 twice every 8s. Each > > toggle corresponds to the reception of collection message (once from > > itself, and once from the mote with id 1)." > > > > > > So I installed the app on two Iris motes. But none of them is blinking > any > > LEDs. I wonder maybe I misunderstood something. Also do I need to > install a > > Basestation? > > I just tested it on a TelosB and I was able to see what the README > describes. > > You can start with one mote. Program that mote with TestNetwork > application with id 0. You should see the LED toggle. It could take up > to 12s to toggle the LED. > > You do not need any base station for this test. > > - om_p > -- Regards, - David
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help