Hi Haripriya, On Tue, Jul 13, 2010 at 1:32 PM, Haripriya priya <[email protected]> wrote: > Hi , > > > I am using tinyos2.x - with iris motes and rf230 radio. > > 1) I found that to turn off and turn on the radio the following commands are > there.. > > command error_t turnOff() Moves to radio into sleep state with the lowest > power consumption but highest wakeup time. > command error_t turnOn() Goes into receive state. > > which are in interface "interface RadioState" which in turn in found in > "module RF230TestM" component... > > ... but this component file is missing in tinyos-2.x and with out that i > can't turn off the radio.. > > Can i know if any other components with interface is available to make the > same ? > > But these are found in > > /cvsroot/tinyos/tinyos-2.x-contrib/berkeley/blip-2.0/apps/tests/rf230/RF230Test > > Makefile RF230TestC.nc RF230TestM.nc > > > > can any one give the link to download these files ?
Use the StdControl interface for the ActiveMessageC component to turn off and on the radio. The interface you have found is for internal use of the radio driver. > 2 ) To set node's sleep interval > > command void setLocalSleepInterval(uint16_t sleepIntervalMs) Set this this > node's radio sleep interval, in milliseconds. is available in "interface > LowPowerListening" > > But i could not locate the component in which it is seen.... Again, the ActiveMessageC component provides this interface, use that (from platforms/iris). > 3) can i find similar functions for "awake "? If the mote is not sleeping then it is awake, so you cannot set a separate interval for that. Miklos > > > Kindly reply... > > Thanks in advance .... > > -- > Regards, > S.Haripriya > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
