I think you have to program the USB chip separately using software from FTDI or the chip's mfg. Look into the interface chip's doc. MS
Michael Ireland wrote: > Hello all - I have manufactured some TelosB motes and run into a > problem: They do not identify correctly. They will program and operate > correctly, but they identify as > > (none) /dev/ttyUSB0 FTDI USB <-> SERIAL > > My impression is that the 93c46 EEPROM needs to be written with the > serial number and the device ID, and that this would need to be > orchestrated via software on the MCU. Am I understanding the situation > correctly? If so, is there an initialization program (or equivalent > process) which can be run on a newly manufactured TelosB to accomplish > this? > > Thank you for considering my troubles... > > Mike > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help