Hello.
I'm using Zolertia Z1 mote and my goal is to use UART0-port to read values from external frequency converter with modbus. (there's MAX232 -circuit connected to UART-port and after that RS-232/485 converter, which connects to external frequency converter. However, I'm confused with how to configure Uart speed parity and so on.. with my *C.nc -file I declare (only relevant parts mentioned) "" uses interface UartStream as Uart; uses interface UartByte as Byte; "" and with *AppC.nc -file there is """ components new Msp430Uart0C() as Uart; components new Msp430Uart0C() as Byte; components PlatformSerial() as Plat; App.Uart -> Uart; App.Byte -> Byte; """ I've implemented all the events UartByte and stream require, but I'm not able to configure serial connection speed etc. and because of that I can't get connection working I tried to use Msp430UartConfigure -interface as well, but it always ended up with compiling mistakes. Also I wonder, what's the purpose of UartControl -interface, since it's not mentioned often at the forum... best regards Kosti
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help