Hi,
I have a problem using MTS310 sensor boards. I have tested the magnetometer
sensors in some MTS310 boards which are hmc1002 as mentioned in data-sheet. I`m
currently using TinyOS1.1 and I programmed my mica2 motes with MicaSBTest1
program, located in /apps/MicaSBVerify/MicaSBTest1.
When I noticed there is not any led status change on approximation to a
magnetic
field, I probed every pin on hmc1002 IC with a multimeter. Although some pin in
accelerometer had a 2volt voltage, it seems that no power signal is routed to
magnetometer sensors in my MTS310s. I tested them with a multimeter and all
pins
were zero volt (all of 20 pins).
Where did I make mistake?
How can I turn magnetometer sensor on in MTS310?
Thanks for your help
bahare
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
