Hi Carlos, The CVS is obsolete, try to use the SVN from google code:
http://code.google.com/p/tinyos-main/ It might work. Best, Miklos On Fri, Jan 14, 2011 at 3:27 PM, Carlos Rodrigues <rodrigues.carlo...@gmail.com> wrote: > Hi, > > My name is Carlos Rodrigues and i'm starting work in my master thesis, about > sensor networks. > I'm trying compiling IPBaseStation (last version in cvs) on iris but the > compilation fails with the error below. > > It is possible give some "lights" about how solve this problem? > > > root@ubuntu:/home/carlos/IPBaseStation# make iris blib install > mib510,/dev/ttyUSB0 > mkdir -p build/iris > compiling BaseStationC to a iris binary > ncc -o build/iris/main.exe -Os -fnesc-separator=__ -Wall -Wshadow > -Wnesc-all -target=iris -fnesc-cfile=build/iris/app.c -board=micasb > -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 > -DNO_IP_MALLOC -DIEEE154FRAMES_ENABLED -DIDENT_APPNAME=\"BaseStationC\" > -DIDENT_USERNAME=\"root\" -DIDENT_HOSTNAME=\"ubuntu\" > -DIDENT_USERHASH=0xa3473ba6L -DIDENT_TIMESTAMP=0x4d3059cbL > -DIDENT_UIDHASH=0x5e9a1276L -fnesc-dump=wiring > -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs, > components)' -fnesc-dumpfile=build/iris/wiring-check.xml BaseStationC.nc -lm > BaseStationP.nc:93:21: error: devconf.h: No such file or directory > BaseStationP.nc:94:24: error: lib6lowpan.h: No such file or directory > In file included from BaseStationC.nc:81: > In component `BaseStationP': > BaseStationP.nc:112: interface IPAddress not found > In file included from BaseStationC.nc:81: > BaseStationP.nc:139: `BLIP_L2_RETRIES' undeclared here (not in a function) > BaseStationP.nc:140: `BLIP_L2_DELAY' undeclared here (not in a function) > BaseStationP.nc:149: syntax error before `*' > BaseStationP.nc: In function `configureReply.runTask': > BaseStationP.nc:180: `reply' undeclared (first use in this function) > BaseStationP.nc:180: (Each undeclared identifier is reported only once > BaseStationP.nc:180: for each function it appears in.) > BaseStationP.nc:180: interface has no command or event named `getShortAddr' > BaseStationP.nc: In function `Boot.booted': > BaseStationP.nc:218: `reply' undeclared (first use in this function) > BaseStationP.nc:218: `config_reply_t' undeclared (first use in this > function) > BaseStationP.nc:218: syntax error before `)' > BaseStationP.nc: In function `SerialControl.startDone': > BaseStationP.nc:237: `reply' undeclared (first use in this function) > BaseStationP.nc:237: `CONFIG_ERROR_BOOTED' undeclared (first use in this > function) > BaseStationP.nc: In function `ConfigureReceive.receive': > BaseStationP.nc:424: `config_cmd_t' undeclared (first use in this function) > BaseStationP.nc:424: `cmd' undeclared (first use in this function) > BaseStationP.nc:425: syntax error before `error' > BaseStationP.nc:433: syntax error before `)' > BaseStationP.nc:436: `CONFIG_ECHO' undeclared (first use in this function) > BaseStationP.nc:436: case label does not reduce to an integer constant > BaseStationP.nc:438: `CONFIG_SET_PARM' undeclared (first use in this > function) > BaseStationP.nc:438: case label does not reduce to an integer constant > BaseStationP.nc:442: interface has no command or event named `setShortAddr' > BaseStationP.nc:452: `CONFIG_REBOOT' undeclared (first use in this function) > BaseStationP.nc:452: case label does not reduce to an integer constant > BaseStationP.nc:455: `CONFIG_KEEPALIVE' undeclared (first use in this > function) > BaseStationP.nc:455: case label does not reduce to an integer constant > BaseStationP.nc:459: `reply' undeclared (first use in this function) > BaseStationP.nc:459: `error' undeclared (first use in this function) > BaseStationP.nc: In function `ConfigureTimer.fired': > BaseStationP.nc:478: `config_reply_t' undeclared (first use in this > function) > In file included from > /opt/tinyos-2.1.1/tos/lib/serial/Serial802_15_4C.nc:43, > from BaseStationC.nc:83: > In component `SerialPacketInfo802_15_4P': > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc: In function > `Info.offset': > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:38: > `cc2420_header_t' undeclared (first use in this function) > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc: In function > `Info.dataLinkLength': > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:41: > `cc2420_header_t' undeclared (first use in this function) > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:41: > `cc2420_footer_t' undeclared (first use in this function) > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc: In function > `Info.upperLength': > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:44: > `cc2420_header_t' undeclared (first use in this function) > /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:44: > `cc2420_footer_t' undeclared (first use in this function) > In component `BaseStationC': > BaseStationC.nc: At top level: > BaseStationC.nc:107: component SerialDevConfC not found > BaseStationC.nc:114: component IPAddressC not found > BaseStationC.nc:108: no match > BaseStationC.nc:109: no match > BaseStationC.nc:115: no match > BaseStationC.nc:118: no match > make: ** [exe0] Erro 1 > > > _______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help