Hi, if I type "make telosb blip" in Ppprouter I obtain these errors:
nesc1: warning: calls to Ppp.getOutputFrame in PppPrintfP fan out, but there is no combine function specified for the return type /home/ema/local/src/blip-rpl-devel//tos/chips/msp430/usart/HplMsp430UsartInterrupts.nc: In function `PlatformSerialHdlcUartP__streamFeeder_task__runTask': /home/ema/local/src/blip-rpl-devel//tos//lib/ppp/PlatformSerialHdlcUartP.nc:120: warning: `loadable_endp' might be used uninitialized in this function msp430-ld: region text is full (build/telosb/main.exe section .text) msp430-ld: section .vectors [0000ffe0 -> 0000ffff] overlaps section .text [00004000 -> 000102c7] msp430-ld: build/telosb/main.exe: section .vectors lma 0xffe0 overlaps previous sections make: *** [exe0] Errore 1 this is my blip extra makefile: # -*- makefile -*- PFLAGS += -DCC2420_HW_ACKNOWLEDGEMENTS PFLAGS += -DCC2420_HW_ADDRESS_RECOGNITION PFLAGS += -DPACKET_LINK -DBLIP_L2_RETRIES=3 ifdef BLIP_L2_MTU PFLAGS += -DTOSH_DATA_LENGTH=$(BLIP_L2_MTU) else PFLAGS += -DTOSH_DATA_LENGTH=90 endif ifndef LOWPAN_ROOT LOWPAN_ROOT=$(TOSROOT) endif PFLAGS+=-I$(TOSROOT)/tos/lib/net/ PFLAGS+=-I$(LOWPAN_ROOT)/support/sdk/c/blip/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/interfaces/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/nwprog/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/shell/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/serial/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/platform/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/icmp/ PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/dhcp/ PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/iovec.c PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/in_cksum.c PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/ip_malloc.c PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/utility.c PFLAGS+=$(LOWPAN_ROOT)/tos/lib/net/blip/table.c Regards Emanuele > From: stev...@eecs.berkeley.edu > Date: Mon, 14 Feb 2011 09:23:38 -0800 > Subject: Re: [Tinyos-help] blip/rpl IPBaseStation > To: ema8...@hotmail.it > CC: tobias.rossb...@imms.de; tinyos-help@millennium.berkeley.edu > > Looks like you need the "blip" make extra -- "make telosb blip". > > Steve > > On Mon, Feb 14, 2011 at 8:03 AM, emanuele l <ema8...@hotmail.it> wrote: > > Hi, > > I'm using blip-rpl-devel now but when I try to compile PppRouter I obtain > > some errors. This is my PATH environment: > > > > export PATH=$HOME/local/bin:$PATH > > export TOSROOT=$HOME/local/src/blip-rpl-devel > > export TOSDIR=$TOSROOT/tos/ > > export MAKERULES=$TOSROOT/support/make/Makerules > > export CLASSPATH=$TOSROOT/support/sdk/java/tinyos.jar:. > > export PYTHONPATH=.:$TOSROOT/support/sdk/python:$PYTHONPATH > > export PATH=$HOME/local/src/blip-rpl-devel/support/sdk/c:$PATH > > export TOSCONTRIB=$HOME/local/src/tinyos-2.x-contrib > > export LOWPAN_ROOT="$TOSCONTRIB/berkeley/blip-2.0" > > export TOSMAKE_PATH="$LOWPAN_ROOT/support/make" > > > > > > and these are errors related to PppRouter: > > > > root@ema-HP-Pavilion-dv6000-RY645EA-ABZ:~/local/src/blip-rpl-devel/apps/PppRouter# > > make micaz > > mkdir -p build/micaz > > compiling PppRouterC to a micaz binary > > ncc -o build/micaz/main.exe -Os -DRPL_ROUTING -DRPL_STORING_MODE > > -I/home/ema/local/src/tinyos-2.x-contrib/berkeley/blip-2.0/tos/lib/net/rpl > > -I/home/ema/local/src/tinyos-2.x/tos//lib/ppp > > -I/home/ema/local/src/tinyos-2.x/tos//lib/fragpool > > -I/home/ema/local/src/tinyos-2.x/tos//lib/serialprintf > > -I/home/ema/local/src/tinyos-2.x/tos//platforms/micaz/chips/msp430 > > -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=micaz > > -fnesc-cfile=build/micaz/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22 > > --param max-inline-insns-single=100000 -DIDENT_APPNAME=\"PppRouterC\" > > -DIDENT_USERNAME=\"root\" -DIDENT_HOSTNAME=\"ema-HP-Pavilion\" > > -DIDENT_USERHASH=0xa3d1d944L -DIDENT_TIMESTAMP=0x4d59505bL > > -DIDENT_UIDHASH=0xaf9e304dL -fnesc-dump=wiring > > -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs, > > components)' -fnesc-dumpfile=build/micaz/wiring-check.xml PppRouterC.nc -lm > > PppRouterC.nc:1:17: error: ppp.h: No such file or directory > > PppRouterP.nc:3:27: error: lib6lowpan/ip.h: No such file or directory > > PppRouterP.nc:4:31: error: lib6lowpan/nwbyte.h: No such file or directory > > PppRouterP.nc:5:34: error: lib6lowpan/ip_malloc.h: No such file or directory > > PppRouterP.nc:6:19: error: dhcp6.h: No such file or directory > > PppRouterP.nc:7:24: error: PrintfUART.h: No such file or directory > > In file included from PppRouterC.nc:5: > > In component `PppRouterP': > > PppRouterP.nc:11: interface IPForward not found > > In file included from PppRouterC.nc:5: > > PppRouterP.nc:15: interface MultiLed not found > > In file included from PppRouterC.nc:5: > > PppRouterP.nc:18: interface LcpAutomaton not found > > PppRouterP.nc:19: interface PppIpv6 not found > > PppRouterP.nc:21: interface ForwardingTable not found > > PppRouterP.nc:22: interface RootControl not found > > PppRouterP.nc:23: interface Dhcp6Info not found > > PppRouterP.nc:28: `linkUp' is not in interface `PppIpv6' > > PppRouterP.nc:29: `linkDown' is not in interface `PppIpv6' > > PppRouterP.nc:31: syntax error before `state' > > PppRouterP.nc:31: `transitionCompleted' is not in interface > > `Ipv6LcpAutomaton' > > PppRouterP.nc:32: `thisLayerUp' is not in interface `Ipv6LcpAutomaton' > > PppRouterP.nc:33: `thisLayerDown' is not in interface `Ipv6LcpAutomaton' > > PppRouterP.nc:34: `thisLayerStarted' is not in interface `Ipv6LcpAutomaton' > > PppRouterP.nc:35: `thisLayerFinished' is not in interface `Ipv6LcpAutomaton' > > PppRouterP.nc: In function `IPControl.startDone': > > PppRouterP.nc:44: implicit declaration of function `inet_pton6' > > PppRouterP.nc:44: `DH6ADDR_ALLAGENT' undeclared (first use in this function) > > PppRouterP.nc:44: (Each undeclared identifier is reported only once > > PppRouterP.nc:44: for each function it appears in.) > > PppRouterP.nc:45: interface has no command or event named `addRoute' > > PppRouterP.nc:45: invalid use of undefined type `struct in6_addr' > > PppRouterP.nc:45: `ROUTE_IFACE_PPP' undeclared (first use in this function) > > PppRouterP.nc:48: interface has no command or event named `addRoute' > > PppRouterP.nc: In function `Boot.booted': > > PppRouterP.nc:56: interface has no command or event named `open' > > PppRouterP.nc:62: interface has no command or event named `setRoot' > > PppRouterP.nc:65: interface has no command or event named `useUnicast' > > PppRouterP.nc: At top level: > > PppRouterP.nc:72: `receive' is not in interface `PppIpv6' > > PppRouterP.nc: In function `PppIpv6.receive': > > PppRouterP.nc:74: arithmetic on pointer to an incomplete type > > PppRouterP.nc:75: interface has no command or event named `toggle' > > PppRouterP.nc:76: interface has no command or event named `recv' > > PppRouterP.nc: At top level: > > PppRouterP.nc:82: warning: `struct in6_addr' declared inside parameter list > > PppRouterP.nc:82: warning: its scope is only this definition or declaration, > > PppRouterP.nc:82: warning: which is probably not what you want. > > PppRouterP.nc:82: warning: `struct ip6_packet' declared inside parameter > > list > > PppRouterP.nc:82: `send' is not in interface `IPForward' > > PppRouterP.nc: In function `IPForward.send': > > PppRouterP.nc:84: implicit declaration of function `iov_len' > > PppRouterP.nc:84: invalid use of undefined type `struct ip6_packet' > > PppRouterP.nc:87: interface has no command or event named `linkIsUp' > > PppRouterP.nc:90: implicit declaration of function `ip_malloc' > > PppRouterP.nc:90: sizeof applied to an incomplete type > > PppRouterP.nc:90: warning: assignment makes pointer from integer without a > > cast > > PppRouterP.nc:94: invalid use of undefined type `struct ip6_packet' > > PppRouterP.nc:94: sizeof applied to an incomplete type > > PppRouterP.nc:95: implicit declaration of function `iov_read' > > PppRouterP.nc:95: invalid use of undefined type `struct ip6_packet' > > PppRouterP.nc:95: sizeof applied to an incomplete type > > PppRouterP.nc:96: interface has no command or event named `toggle' > > PppRouterP.nc:97: interface has no command or event named `transmit' > > PppRouterP.nc:97: sizeof applied to an incomplete type > > PppRouterP.nc:98: implicit declaration of function `ip_free' > > In component `PppRouterC': > > PppRouterC.nc: At top level: > > PppRouterC.nc:10: component LedC not found > > PppRouterC.nc:13: component PppDaemonC not found > > PppRouterC.nc:16: component PppIpv6C not found > > PppRouterC.nc:17: component's specification has no element named > > `ControlProtocol' > > PppRouterC.nc:18: component's specification has no element named `Protocol' > > PppRouterC.nc:24: component PlatformSerialHdlcUartC not found > > PppRouterC.nc:28: component PppPrintfC not found > > PppRouterC.nc:28: component PppC not found > > PppRouterC.nc:30: component's specification has no element named `Protocol' > > PppRouterC.nc:33: component IPStackC not found > > PppRouterC.nc:33: component IPForwardingEngineP not found > > PppRouterC.nc:34: `ROUTE_IFACE_PPP' undeclared here (not in a function) > > PppRouterC.nc:39: component RPLRoutingC not found > > PppRouterC.nc:50: component Dhcp6ClientC not found > > PppRouterC.nc:11: no match > > PppRouterC.nc:14: no match > > PppRouterC.nc:17: cannot find `PppControlProtocol' > > PppRouterC.nc:18: cannot find `PppProtocol' > > PppRouterC.nc:19: cannot find `Ppp' > > PppRouterC.nc:20: cannot find `LowerLcpAutomaton' > > PppRouterC.nc:21: no match > > PppRouterC.nc:22: no match > > PppRouterC.nc:25: cannot find `HdlcUart' > > PppRouterC.nc:26: cannot find `UartControl' > > PppRouterC.nc:29: cannot find `Ppp' > > PppRouterC.nc:30: cannot find `PppProtocol' > > PppRouterC.nc:31: cannot find `Ppp' > > PppRouterC.nc:34: cannot find `IPForward' > > PppRouterC.nc:35: no match > > PppRouterC.nc:36: no match > > PppRouterC.nc:40: no match > > PppRouterC.nc:51: no match > > make: *** [exe0] Errore 1 > > root@ema-HP-Pavilion-dv6000-RY645EA-ABZ:~/local/src/blip-rpl-devel/apps/PppRouter# > > source /home/ema/.bashrc > > root@ema-HP-Pavilion-dv6000-RY645EA-ABZ:~/local/src/blip-rpl-devel/apps/PppRouter# > > make micaz > > mkdir -p build/micaz > > compiling PppRouterC to a micaz binary > > ncc -o build/micaz/main.exe -Os -DRPL_ROUTING -DRPL_STORING_MODE > > -I/home/ema/local/src/tinyos-2.x-contrib/berkeley/blip-2.0/tos/lib/net/rpl > > -I/home/ema/local/src/blip-rpl-devel/tos//lib/ppp > > -I/home/ema/local/src/blip-rpl-devel/tos//lib/fragpool > > -I/home/ema/local/src/blip-rpl-devel/tos//lib/serialprintf > > -I/home/ema/local/src/blip-rpl-devel/tos//platforms/micaz/chips/msp430 > > -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=micaz > > -fnesc-cfile=build/micaz/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22 > > --param max-inline-insns-single=100000 -DIDENT_APPNAME=\"PppRouterC\" > > -DIDENT_USERNAME=\"root\" -DIDENT_HOSTNAME=\"ema-HP-Pavilion\" > > -DIDENT_USERHASH=0xa3d1d944L -DIDENT_TIMESTAMP=0x4d5950e6L > > -DIDENT_UIDHASH=0x349bd0f3L -fnesc-dump=wiring > > -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs, > > components)' -fnesc-dumpfile=build/micaz/wiring-check.xml PppRouterC.nc -lm > > PppRouterP.nc:3:27: error: lib6lowpan/ip.h: No such file or directory > > PppRouterP.nc:4:31: error: lib6lowpan/nwbyte.h: No such file or directory > > PppRouterP.nc:5:34: error: lib6lowpan/ip_malloc.h: No such file or directory > > PppRouterP.nc:6:19: error: dhcp6.h: No such file or directory > > PppRouterP.nc:7:24: error: PrintfUART.h: No such file or directory > > In file included from PppRouterC.nc:5: > > In component `PppRouterP': > > PppRouterP.nc:11: interface IPForward not found > > In file included from PppRouterC.nc:5: > > PppRouterP.nc:21: interface ForwardingTable not found > > PppRouterP.nc:22: interface RootControl not found > > PppRouterP.nc:23: interface Dhcp6Info not found > > PppRouterP.nc: In function `IPControl.startDone': > > PppRouterP.nc:44: implicit declaration of function `inet_pton6' > > PppRouterP.nc:44: `DH6ADDR_ALLAGENT' undeclared (first use in this function) > > PppRouterP.nc:44: (Each undeclared identifier is reported only once > > PppRouterP.nc:44: for each function it appears in.) > > PppRouterP.nc:45: interface has no command or event named `addRoute' > > PppRouterP.nc:45: invalid use of undefined type `struct in6_addr' > > PppRouterP.nc:45: `ROUTE_IFACE_PPP' undeclared (first use in this function) > > PppRouterP.nc:48: interface has no command or event named `addRoute' > > PppRouterP.nc: In function `Boot.booted': > > PppRouterP.nc:62: interface has no command or event named `setRoot' > > PppRouterP.nc:65: interface has no command or event named `useUnicast' > > PppRouterP.nc: In function `PppIpv6.receive': > > PppRouterP.nc:74: arithmetic on pointer to an incomplete type > > PppRouterP.nc:76: interface has no command or event named `recv' > > PppRouterP.nc: At top level: > > PppRouterP.nc:82: warning: `struct in6_addr' declared inside parameter list > > PppRouterP.nc:82: warning: its scope is only this definition or declaration, > > PppRouterP.nc:82: warning: which is probably not what you want. > > PppRouterP.nc:82: warning: `struct ip6_packet' declared inside parameter > > list > > PppRouterP.nc:82: `send' is not in interface `IPForward' > > PppRouterP.nc: In function `IPForward.send': > > PppRouterP.nc:84: implicit declaration of function `iov_len' > > PppRouterP.nc:84: invalid use of undefined type `struct ip6_packet' > > PppRouterP.nc:90: implicit declaration of function `ip_malloc' > > PppRouterP.nc:90: sizeof applied to an incomplete type > > PppRouterP.nc:90: warning: assignment makes pointer from integer without a > > cast > > PppRouterP.nc:94: invalid use of undefined type `struct ip6_packet' > > PppRouterP.nc:94: sizeof applied to an incomplete type > > PppRouterP.nc:95: implicit declaration of function `iov_read' > > PppRouterP.nc:95: invalid use of undefined type `struct ip6_packet' > > PppRouterP.nc:95: sizeof applied to an incomplete type > > PppRouterP.nc:97: sizeof applied to an incomplete type > > PppRouterP.nc:98: implicit declaration of function `ip_free' > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc:32:25: error: > > PlatformLed.h: No such file or directory > > In file included from PppRouterC.nc:10: > > In component `LedC': > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc: At top level: > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc:88: component > > PlatformLedC not found > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc:89: no match > > In file included from > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C.nc:47, > > from > > /home/ema/local/src/blip-rpl-devel/tos//lib/ppp/LcpAutomatonC.nc:72, > > from > > /home/ema/local/src/blip-rpl-devel/tos//lib/ppp/LinkControlProtocolC.nc:89, > > from > > /home/ema/local/src/blip-rpl-devel/tos//lib/ppp/PppDaemonC.nc:65, > > from PppRouterC.nc:13: > > In component `MuxAlarmMilli32C_': > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C_.nc:55: > > component AlarmMilli32C not found > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C_.nc:55: > > component `AlarmMilli32C' is not generic > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C_.nc:56: no > > match > > In component `PppRouterC': > > PppRouterC.nc:33: component IPStackC not found > > PppRouterC.nc:33: component IPForwardingEngineP not found > > PppRouterC.nc:34: `ROUTE_IFACE_PPP' undeclared here (not in a function) > > PppRouterC.nc:39: component RPLRoutingC not found > > PppRouterC.nc:50: component Dhcp6ClientC not found > > PppRouterC.nc:34: cannot find `IPForward' > > PppRouterC.nc:35: no match > > PppRouterC.nc:36: no match > > PppRouterC.nc:40: no match > > PppRouterC.nc:51: no match > > make: *** [exe0] Errore 1 > > > > > > Regards > > Emanuele > > > > > > > > > >> Date: Mon, 14 Feb 2011 16:46:59 +0100 > >> From: tobias.rossb...@imms.de > >> To: ema8...@hotmail.it > >> Subject: Re: [Tinyos-help] blip/rpl IPBaseStation > >> > >> > Hi, > >> > I would like to study new blip and rpl's implementation but > >> > IPBaseStation app gives me some errors: > >> > >> Are you using the code from the blip-rpl-devel branch? In this case, you > >> have to build PppRouter as basestation. You can find the installation > >> instructions under blip-rpl-devel/README.blip. > >> > >> If you are using tinyos 2.1.1, build the IPBaseStation app with: > >> > >> make tmote blip install > >> > >> http://docs.tinyos.net/index.php/BLIP_Tutorial > >> > >> Tobias > >> > > > > _______________________________________________ > > Tinyos-help mailing list > > Tinyos-help@millennium.berkeley.edu > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > > -- > stephen dawson-haggerty > http://cs.berkeley.edu/~stevedh > uc berkeley wireless and embedded systems lab > berkeley, ca 94720
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help