Hi Sergio, Thanks for your reply. Actually, I am using cygwin in windows. I could run Blink, CntToLeds using /dev/ttyS3 in cygwin. In the tutorial I found that COM4 is represented as ttyS3 in cygwin but in SerialForwarder I had to Mention COM#.
Whenever, I compiled (burn) the "Surge_Reliable" app into the Micaz motes it compiled without error but with some warnings. But Surge-View is not displaying any info since you also mentioned "resynchronizing" means not connection. Is anyone in the group face similar problem and solved. I would appreciate your help. Thanks. Nazmul --- On Fri, 5/13/11, Sergio Valcarcel <serteck...@gmail.com> wrote: From: Sergio Valcarcel <serteck...@gmail.com> Subject: Re: [Tinyos-help] Urgent Help Require: Surge_Reliable Application To: "Nazmul Hossain" <lemondh...@yahoo.com> Cc: "tinyos-help@millennium.berkeley.edu" <tinyos-help@millennium.berkeley.edu> Received: Friday, May 13, 2011, 7:27 PM Hi Nazmul, I have no used serial connections for a while but I would say that COM4 sounds like Windows, while it seems you are programming in a Linux shell using the /dev/ttyS3. So I would recommend you to check the tutorials to see whether you are setting the serial forwarder properly. The resynchronizing loop means that there is no connection in COM4 Cheers! Sergio On Fri, May 13, 2011 at 3:39 PM, Nazmul Hossain <lemondh...@yahoo.com> wrote: Hi, I compiled and loaded Surge_Reliable application as per instructions into two micaz motes by giving them ID 0 and 1. During compilation and burning the app into the motes there were many warnings. Then I wanted to see how Surge_Reliable app works in multihop routing. So, Mote with ID 0 is connected to Mib520 programming board to work as a Base station and mote with ID 1 powered on using batteries. Now I wanted to see the routing information using "Surge-View". Firstly, I ran "SerialForwarder". I ran the serialforwarder for COM4 since I could burn the app into the mote using "make micaz install.0 mib510,/dev/ttyS3" SerialForwarder gives me the following output Listening to serial@COM4 Listening for client connections on port 9001 serial@COM4:19200: resynchronising Does this mean that the listener is listening and connected to the port properly? Then I ran "Surge 125" and GUI appeared but there is no mote and other information in that GUI. Can anyone pls tell me what am I doing wrong. I would appreciate if you kindly help me running this application properly. Thanks. Nazmul _______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help