Hi All,
I compiled and loaded Surge_Reliable application into two micaz motes by giving
them ID 0 and 1 as per instructions using cygwin. During compilation and
burning the app into the motes there were many warnings but no errors.
Then I wanted to see how Surge_Reliable app works in multihop routing. So, Mote
with ID 0 is connected to Mib520 programming board to work as a Base station
and mote with ID 1 powered on using batteries.
Now I wanted to see the routing information using "Surge-View". Firstly, I ran
"SerialForwarder". I ran the serialforwarder for COM4 since I could burn the
app into the mote using
"make micaz install.0 mib510,/dev/ttyS3"
SerialForwarder gives me the following output
Listening to serial@COM4
Listening for client connections on port 9001
serial@COM4:19200: resynchronising
I came to know that it means COM4 is not listening or not connected?
Then I ran "Surge 125" and GUI appeared but there is no mote and other
information in that GUI.
Can anyone pls tell me what am I doing wrong. I would appreciate if you kindly
help me running this application properly.
If there is anyone who could run Surge_Reliable apps?
Thanks.
Nazmul
_______________________________________________
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help