I tried to compile an application by the program notepad and I got some errors because I use some interfaces (Boot, Timer....) that isn't recognized when compiled. So, I tried compile by the tinyos-2.1.1 installed in Ubuntu Linux. Later I tried to load by the Moteconfig program the executable (main.exe) generated from this compiling, so I got the following message: *platform N/A does not adapt with current MCU 128. Please check it. * Someone can help me?
Best Regards, 2011/9/6 Rafael de Oliveira Costa <rafaeldeoliveiraco...@gmail.com> > Marianna, > this command only deploy the application to the mote plugged on the > basestation. > > Rafael de Oliveira Costa > M.Sc. Student > PPGI / DCC - iNCE/ UFRJ > Rio de Janeiro, RJ, Brazil > > "The first step to getting the things you want out of life is this : decide > what you want" > Ben Stein > > > On Mon, Sep 5, 2011 at 9:17 PM, Marianna Araujo < > marianna.angel...@gmail.com> wrote: > >> Thanks for the reply. It worked to submit the Blink application, but I >> have a doubt. When I send this application only the base station receives >> it? >> >> Best Regards, >> >> >> 2011/9/5 Rafael de Oliveira Costa <rafaeldeoliveiraco...@gmail.com> >> >>> Hi Marianna, >>> >>> here i'm using crossbow's motes and they works fine. to submit an >>> application type make micaz install,1 mib510,/dev/ttyUSB0. >>> >>> Rafael de Oliveira Costa >>> M.Sc. Student >>> PPGI / DCC - iNCE/ UFRJ >>> Rio de Janeiro, RJ, Brazil >>> >>> "The first step to getting the things you want out of life is this : >>> decide what you want" >>> Ben Stein >>> >>> >>> On Mon, Sep 5, 2011 at 11:32 AM, Marianna Araujo < >>> marianna.angel...@gmail.com> wrote: >>> >>>> I started using the crossbow's motes (MTS420 platform - micaz/mica2) and >>>> I have been problem. I tried send an application for the sources and now >>>> one >>>> of them isn't been recognized in network. I rebooted the other sources and >>>> they were ok. However, exceptionally this source, did not work. I've tried >>>> to upload the firmware, but I really do not know which firmware suitable >>>> for >>>> him. Can you tell me what should I do? >>>> >>>> Another thing, I couldn't submit an application for the motes, for >>>> example the blink application. In the notepad, after to compiling, I >>>> made "make micaz reinstall mib520 (because I use USB port), com3 (the lower >>>> port)" and I got the following error "MIB520 must be *defined, try >>>> "make micaz help". Stop". >>>> * >>>> Best Regards, >>>> >>>> -- >>>> Marianna Araújo >>>> >>>> _______________________________________________ >>>> Tinyos-help mailing list >>>> Tinyos-help@millennium.berkeley.edu >>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >>>> >>> >>> >> >> >> -- >> Marianna Araújo >> > > -- Marianna Araújo
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
