Hello,
I ran the simulations with powertossim. The analysis results show that all of them are zeros. The debug file is as follows : DEBUG (0): 127,LED_STATE,LED0,ON DEBUG (0): 127,LED_STATE,LED1,ON DEBUG (0): 127,LED_STATE,LED2,ON DEBUG (0): 159,LED_STATE,LED0,ON DEBUG (0): 159,LED_STATE,LED1,OFF DEBUG (0): 159,LED_STATE,LED2,OFF DEBUG (1): 240,LED_STATE,LED0,ON DEBUG (1): 240,LED_STATE,LED1,ON DEBUG (1): 240,LED_STATE,LED2,ON DEBUG (1): 228,LED_STATE,LED0,ON DEBUG (1): 228,LED_STATE,LED1,OFF DEBUG (1): 228,LED_STATE,LED2,OFF DEBUG (2): 97,LED_STATE,LED0,ON DEBUG (2): 97,LED_STATE,LED1,ON DEBUG (2): 97,LED_STATE,LED2,ON DEBUG (2): 85,LED_STATE,LED0,ON DEBUG (2): 85,LED_STATE,LED1,OFF DEBUG (2): 85,LED_STATE,LED2,OFF DEBUG (3): 210,LED_STATE,LED0,ON DEBUG (3): 210,LED_STATE,LED1,ON DEBUG (3): 210,LED_STATE,LED2,ON DEBUG (3): 198,LED_STATE,LED0,ON DEBUG (3): 198,LED_STATE,LED1,OFF DEBUG (3): 198,LED_STATE,LED2,OFF The analysis results Efficiency table loaded, size=102 Recovery table loaded, size=11 trace file used: application.trace energy model used: micaZ_energy_model.txt maxseen 3 mote battery starting energy: 21600000 mJ Mote 0, cpu total: 0.0 Mote 0, radio total: 0.0 Mote 0, adc total: 0.0 Mote 0, leds total: 0.0 Mote 0, sensor total: 0.0 Mote 0, eeprom total: 0.0 Mote 0, cpu_cycle total: 0.0 Mote 0, Total energy used: 0 Mote 0, Battery energy remaining (linear): 21600000 Mote 0, Battery energy remaining: 21600000 Mote 0, Battery mAh remaining: 2000.0 Mote 1, cpu total: -0.0 Mote 1, radio total: 0.0 Mote 1, adc total: 0.0 Mote 1, leds total: -0.0 Mote 1, sensor total: 0.0 Mote 1, eeprom total: 0.0 Mote 1, cpu_cycle total: 0.0 Mote 1, Total energy used: -0 Mote 1, Battery energy remaining (linear): 21600000 Mote 1, Battery energy remaining: 21600000 Mote 1, Battery mAh remaining: 2000.0 Thanks, John
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
