Hi, I am trying to implement a 64 bit IEEE address frame for the RF230 using the RX_AACK mode. The problem is that i the receiver does not receive any data. If i use RF230_RX_ON, i am able to receive the data. I used a sniffer and was able to capture the following raw data
Sender address = 1 Dest address = Broadcast Pan ID = 0x22 The last block of data is the MAC payload 41 CC 11 22 00 FF FF 00 00 00 00 00 00 F8 00 00 00 00 00 00 00 3F 08 0B 03 00 F8 00 0F 10 00 AA 01 F8 00 00 00 00 00 00 00 00 00 The sniffer shows that the FCS is OK. Is there some other filter which is causing the packet to be rejected. Thanks, Lou
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
