Hi
I am trying to set up an imote2 toolchain on a 64 bit computer. I have
installed all the necessary utilities. I run into the following error when
I try to compile the simple Blink app.
*/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/toscrt0.s:
Assembler messages:
/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/toscrt0.s:268:
Error: symbol .tosstart is in a different section
make: *** [exe0] Error 1*
I have pasted the whole terminal output below, just in case. I was unable
to find any other references online to this problem. I would appreciate it
if someone could help me out.
bharath@chad-desktop:~/TinyOS/intelmote2/apps$ cd Blink/
bharath@chad-desktop:~/TinyOS/intelmote2/apps/Blink$ make intelmote2
/home/bharath/TinyOS/intelmote2//support/make/intelmote2.extra:41: warning:
overriding commands for target `bytes'
/home/bharath/TinyOS/tinyos-2.x//support/make/pxa27x/pxa27x.rules:104:
warning: ignoring old commands for target `bytes'
/home/bharath/TinyOS/intelmote2//support/make/intelmote2.extra:41: warning:
overriding commands for target `bytes'
/home/bharath/TinyOS/intelmote2//support/make/intelmote2.extra:41: warning:
ignoring old commands for target `bytes'
mkdir -p build/intelmote2
echo -mcpu=iwmmxt -mfpu=softfpa -defsym BOOTLOADER=1
/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/toscrt0.s
/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x/pxa27x_util.s
/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x/mmu_table.s -o
build/intelmote2/asms.o
-mcpu=iwmmxt -mfpu=softfpa -defsym BOOTLOADER=1
/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/toscrt0.s
/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x/pxa27x_util.s
/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x/mmu_table.s -o
build/intelmote2/asms.o
compiling BlinkAppC to a intelmote2 binary
ncc -o build/intelmote2/main.exe -Os
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/chips/da9030
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2
-I/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x
-I/home/bharath/TinyOS/intelmote2//tos/sensorboards/im2cb
-I/home/bharath/TinyOS/intelmote2//tos/sensorboards/xbow_cb
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/chips/da9030
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2
-I/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x
-I/home/bharath/TinyOS/intelmote2//tos/chips/ov7649
-I/home/bharath/TinyOS/intelmote2//tos/chips/ov7670
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/chips/da9030
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2
-I/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x
-I/home/bharath/TinyOS/intelmote2//tos/sensorboards/im2cb
-I/home/bharath/TinyOS/intelmote2//tos/sensorboards/xbow_cb
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/chips/da9030
-I/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2
-I/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x
-I/home/bharath/TinyOS/intelmote2//tos/chips/ov7649
-I/home/bharath/TinyOS/intelmote2//tos/chips/ov7670 -Wall -Wshadow
-Wnesc-all -target=intelmote2 -fnesc-cfile=build/intelmote2/app.c -board=
-mcpu=xscale -DDEFINED_TOS_AM_GROUP=0x22 -DBOOTLOADER -DBOOTLOADER
-T/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/tos.x
-DSYSTEM_CORE_FREQUENCY=13 -DSYSTEM_BUS_FREQUENCY=13 BlinkAppC.nc -lm
/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/toscrt0.s
/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x/pxa27x_util.s
/home/bharath/TinyOS/intelmote2//tos/chips/pxa27x/mmu_table.s
/home/bharath/TinyOS/tinyos-2.x//tos/chips/pxa27x/HplPXA27xInterruptM.nc:
In function ‘HplPXA27xInterruptM$allocate’:
/home/bharath/TinyOS/tinyos-2.x//tos/chips/pxa27x/HplPXA27xInterruptM.nc:96:12:
warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
uint32_t tmp;
^
/home/bharath/TinyOS/tinyos-2.x//tos/chips/pxa27x/HplPXA27xInterruptM.nc:
In function ‘HplPXA27xInterruptM$enable’:
/home/bharath/TinyOS/tinyos-2.x//tos/chips/pxa27x/HplPXA27xInterruptM.nc:164:12:
warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
uint32_t tmp;
^
/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/toscrt0.s:
Assembler messages:
/home/bharath/TinyOS/intelmote2//tos/platforms/intelmote2/toscrt0.s:268:
Error: symbol .tosstart is in a different section
make: *** [exe0] Error 1
Thanks
Bharath
_______________________________________________
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
