Sending again from my tinyos-help subscribed address.
On Mon, Apr 7, 2014 at 6:51 PM, András Bíró <andras.b...@unicomp.hu> wrote: > Hi Emanual, > > Yes, I did port deluge to some atm128rfa1/stm25p platform, but I'm not > familiar with msp430. I think shimmer2r doesn't have any integrated flash, > just the optional SD card, which is unsupported by both deluge and tosboot, > and the drivers present in tinyos is far from the best (a friend of mine > complained about it a lot). That meens, that first you need to write an sd > card driver which supports BlockRead/BlockWrite in tinyos, then an other SD > card driver for tosboot, which supports reading. This is way too much work > to get deluge working, if you ask me. > > But, if you want to dig yourself in deluge code, here's an advice: there's > a lot of duplacated code in tos/lib/tosboot and tos/lib/net/Deluge/extra. > tos/lib/net/Deluge/extra is rearly used if you copy some files to tosboot, > it will work without it, with much less confusion. > > Best, > Andris > > > On Mon, Apr 7, 2014 at 6:15 PM, Emanuel Lima Lima < > emanuelrl...@hotmail.com> wrote: > >> Hi András Bíró, >> >> I'm trying to put Deluge T2 to work with the Shimmer2r platform and i >> saw that you make the same to other platforms, perhaps for the Shimmer >> platform too. Is that the case? If not, could you give me some tips where >> do i start? >> >> Any help would be helpfull. >> >> Thanks very much, >> >> Emanuel Lima >> >> <https://www.mail-archive.com/search?l=tinyos-help@millennium.berkeley.edu&q=from:%22Andr%C3%A1s+B%C3%ADr%C3%B3%22> >> > >
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
