I use Mica mote and when run the little guy sleep program under apps/, I got the following message,
make: `mica' is up to date. sleep 1 uisp -dprog=dapa_2 -dno-poll --erase pulse Probably the AVR MCU is not in the RESET state. Check it out and run me again. make: *** [LG_sleep.install] Error 2
I found similar complaints previously
Kyle Jamieson [EMAIL PROTECTED] Wed May 7 15:12:13 PDT 2003
I'm trying to program the Little Guy on the Mica. Under the TinyOS 0.6.1 distro, I cd to nest/tos/platform/littleguy and make install. This works about 10% of the time. The other 90% of the time I get:
-----
Atmel AVR AT90S2343 is found. Uploading: flash sleep 1 uisp -dprog=dapa_2 -dno-poll --verify if=MICA.srec pulse Probably the AVR MCU is not in the RESET state. Check it out and run me again.
-----
Sometimes flipping the power switch works. Other times it fails so many times I think I burn something out, and I get:
-----
An error has occurred during the AVR initialization. * Target status: Vendor Code = 0xff, Part Family = 0xff, Part Number = 0xff
Probably the wiring is incorrect or target might be `damaged'.
-----
Any clue?
Rong
_______________________________________________ Tinyos-users mailing list [EMAIL PROTECTED] http://mail.Millennium.Berkeley.EDU/mailman/listinfo/tinyos-users
