You have been subscribed to a public bug by Nicolas Dechesne (ndec):
When flash_kernel runs on blaze, it flashes in /dev/mmcblk0p1 (as per
flash_kernel.conf). however on blaze mmcblk0 is the device name for the
eMMC, not the SD card.
also in the image, the initial boot.scr has mmcblk0 hard coded, so it
needs to be documented that this must be changed when booted on blaze.
blaze and panda are different machines at kernel level. on blaze
/proc/cpuinfo contains:L
$ cat /proc/cpuinfo
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
<snip>
Hardware : OMAP4430 4430SDP board
Revision : 0010
Serial : 0000000000000000
** Affects: jasper-initramfs (Ubuntu)
Importance: Undecided
Status: New
** Tags: armel
--
Flashing OMAP4 kernel uses the wrong partition on Blaze
https://bugs.launchpad.net/bugs/640406
You received this bug notification because you are a member of TI OMAP
Developers, which is a direct subscriber.
_______________________________________________
Mailing list: https://launchpad.net/~tiomap-dev
Post to : [email protected]
Unsubscribe : https://launchpad.net/~tiomap-dev
More help : https://help.launchpad.net/ListHelp
