** Description changed: Description: ========== - Not getting control of serial port. + Not getting control of serial port. Bootup pandaboard with build: https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 Serial logs are printed but I do not get control of serial console(no # prompt available to enter any text) + + Also, + adb shell (over usb) does not yield a shell. Other adb commands work fine. + Reproducible: =========== Yes, 5/5 time IMPACT: ======== Can't get hold of serial console, blocks all debugging which can be done via serial console Steps: ========== 1. Flash sd card with image https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 - follow instructions on this page. 2. Put sd card in pandaboard 4430 or 4460 and bootup. Serial cable connected from board to host machine. 3. Run command "minicom -D /dev/ttyS0 " on host machine. Issue: I can see logs getting printed on serial console but I do not get # prompt on serial port. + Also, + adb shell (over usb) does not yield a shell. Other adb commands work fine. Hardware: ========== Pandaboard 4430 /4460 Serial cable from Device to Host PC. USB Mouse connected HDMI out to TV 8GB SD card Software: ========== https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 Logs: ===== minicom logs attached.
-- You received this bug notification because you are a member of TI OMAP Developers, which is subscribed to linaro-landing-team-ti. https://bugs.launchpad.net/bugs/965091 Title: Panda: Can't enter commands on serial console for "panda-master-gcc44 -aosp-stable-blob" Status in Linaro Android: New Status in Linaro Texas Instruments Landing Team: New Bug description: Description: ========== Not getting control of serial port. Bootup pandaboard with build: https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 Serial logs are printed but I do not get control of serial console(no # prompt available to enter any text) Also, adb shell (over usb) does not yield a shell. Other adb commands work fine. Reproducible: =========== Yes, 5/5 time IMPACT: ======== Can't get hold of serial console, blocks all debugging which can be done via serial console Steps: ========== 1. Flash sd card with image https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 - follow instructions on this page. 2. Put sd card in pandaboard 4430 or 4460 and bootup. Serial cable connected from board to host machine. 3. Run command "minicom -D /dev/ttyS0 " on host machine. Issue: I can see logs getting printed on serial console but I do not get # prompt on serial port. Also, adb shell (over usb) does not yield a shell. Other adb commands work fine. Hardware: ========== Pandaboard 4430 /4460 Serial cable from Device to Host PC. USB Mouse connected HDMI out to TV 8GB SD card Software: ========== https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 Logs: ===== minicom logs attached. To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-android/+bug/965091/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~tiomap-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~tiomap-dev More help : https://help.launchpad.net/ListHelp
