Observed on Hardware Pack: http://snapshots.linaro.org/precise/hwpacks/lt-panda-x11-base/50 /hwpack_linaro-lt-panda-x11-base_20120514-50_armhf_supported.tar.gz
with ubuntu image: http://snapshots.linaro.org/precise/images/ubuntu-desktop/158/linaro- precise-ubuntu-desktop-20120515-158.tar.gz Below is the console log output: [ 203.006469] omapdss HDMI error: failed to power on device [ 203.041442] cannot lock PLL [ 203.045043] CFG1 0x21c1e [ 203.047576] CFG2 0x602004 [ 203.050048] CFG4 0x75555 [ 203.053375] omapdss HDMI error: failed to power on device [ 203.171386] cannot lock PLL [ 203.175506] CFG1 0x21c1e [ 203.175506] CFG2 0x602004 [ 203.175506] CFG4 0x75555 [ 203.175537] omapdss HDMI error: failed to power on device [ 203.175537] omapdss error: failed to power on [ 203.177673] omapdss DISPC error: GO bit not down for channel 2 [ 203.220703] omapdss DISPC error: GO bit not down for channel 2 [ 203.229339] omapdss MANAGER error: overlays 1 and 0 have the same zorder 0 [ 203.236572] omapdss APPLY error: failed to enable overlay 0: check_settings failed [ 203.314880] cannot lock PLL [ 203.317749] CFG1 0x21c1e [ 203.320739] CFG2 0x602004 [ 203.320983] CFG4 0x75555 [ 203.326385] omapdss HDMI error: failed to power on device [ 203.357513] cannot lock PLL [ 203.361358] CFG1 0x21c1e [ 203.364013] CFG2 0x602004 [ 203.367034] CFG4 0x75555 [ 203.369720] omapdss HDMI error: failed to power on device [ 203.562011] cannot lock PLL [ 203.565216] CFG1 0x21c1e [ 203.568420] CFG2 0x602004 [ 203.571166] CFG4 0x75555 [ 203.573638] omapdss HDMI error: failed to power on device [ 203.605590] cannot lock PLL [ 203.608764] CFG1 0x21c1e [ 203.611450] CFG2 0x602004 [ 203.613677] CFG4 0x75555 [ 203.617065] omapdss HDMI error: failed to power on device [ 204.275756] cannot lock PLL [ 204.282104] CFG1 0x21c1e [ 204.284790] CFG2 0x602004 [ 204.287780] CFG4 0x75555 [ 204.289520] omapdss HDMI error: failed to power on device [ 204.296356] omapdss error: failed to power on [ 204.327239] cannot lock PLL [ 204.329864] CFG1 0x21c1e [ 204.332855] CFG2 0x602004 [ 204.335845] CFG4 0x75555 [ 204.336029] omapdss HDMI error: failed to power on device [ 204.344543] omapdss error: failed to power on [ 207.378021] cannot lock PLL [ 207.395874] CFG1 0x21c1e [ 207.398559] CFG2 0x602004 [ 207.401306] CFG4 0x75555 [ 207.403961] omapdss HDMI error: failed to power on device [ 207.448760] cannot lock PLL [ 207.451812] CFG1 0x21c1e [ 207.454467] CFG2 0x602004 [ 207.454467] CFG4 0x75555 [ 207.466186] omapdss HDMI error: failed to power on device [ 207.466857] omapdss error: failed to power on [ 207.533721] cannot lock PLL [ 207.533721] CFG1 0x21c1e [ 207.533905] CFG2 0x602004 [ 207.533905] CFG4 0x75555 [ 207.533905] omapdss HDMI error: failed to power on device [ 213.058654] cannot lock PLL [ 213.065521] CFG1 0x21c1e [ 213.068572] CFG2 0x602004 [ 213.069061] CFG4 0x75555 [ 213.074035] omapdss HDMI error: failed to power on device root@linaro-ubuntu-desktop:~# [ 223.122802] cannot lock PLL [ 223.128204] CFG1 0x21c1e [ 223.131500] CFG2 0x602004 [ 223.134277] CFG4 0x75555 [ 223.134277] omapdss HDMI error: failed to power on device [ 233.187469] cannot lock PLL [ 233.187469] CFG1 0x21c1e [ 233.193847] CFG2 0x602004 [ 233.193847] CFG4 0x75555 [ 233.193847] omapdss HDMI error: failed to power on device [ 243.250274] cannot lock PLL [ 243.250488] CFG1 0x21c1e [ 243.271179] CFG2 0x602004 [ 243.271240] CFG4 0x75555 [ 243.276611] omapdss HDMI error: failed to power on device [ 253.337707] cannot lock PLL [ 253.341735] CFG1 0x21c1e [ 253.342712] CFG2 0x602004 [ 253.342712] CFG4 0x75555 -- You received this bug notification because you are a member of TI OMAP Developers, which is subscribed to linaro-landing-team-ti. https://bugs.launchpad.net/bugs/989547 Title: Panda: suspend resume fails Status in Linaro Texas Instruments Landing Team: New Status in Linaro Ubuntu Evaluation Builds: New Bug description: Description: --------------- Device not able to resume after entering suspend mode. Tested using: http://snapshots.linaro.org/precise/hwpacks/lt-panda-x11-base/10/hwpack_linaro-lt-panda-x11-base_20120426-10_armhf_supported.tar.gz http://snapshots.linaro.org/precise/images/ubuntu-desktop/119/linaro-precise-ubuntu-desktop-20120426-119.tar.gz Reproducible: --------------- Yes , 5/5 Steps to reproduce: --------------------- Follow test case description: https://wiki.linaro.org/Platform/QA/TestCases/Ubuntu#Suspend.2BAC8-Resume Hardware: ---------- Panda 4430 Software: ----------- http://snapshots.linaro.org/precise/hwpacks/lt-panda-x11-base/10/hwpack_linaro-lt-panda-x11-base_20120426-10_armhf_supported.tar.gz http://snapshots.linaro.org/precise/images/ubuntu-desktop/119/linaro-precise-ubuntu-desktop-20120426-119.tar.gz sd card image created: sudo linaro-media-create --mmc /dev/sdb --dev panda --hwpack hwpack_linaro-lt-panda-x11-base_20120426-10_armhf_supported.tar.gz --binary linaro-precise-ubuntu-desktop-20120426-119.tar.gz To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-landing-team-ti/+bug/989547/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~tiomap-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~tiomap-dev More help : https://help.launchpad.net/ListHelp
