The device tree is already in the hardware pack: http://snapshots.linaro.org/precise/hwpacks/lt-panda-x11-base/69 /hwpack_linaro-lt-panda-x11-base_20120523-69_armhf_supported.tar.gz
with ubuntu image: http://snapshots.linaro.org/precise/images/ubuntu-desktop/175/linaro- precise-ubuntu-desktop-20120523-175.tar.gz This bug can be closed now. Below is the boot log: Welcome to minicom 2.4 OPTIONS: I18n Compiled on Jun 3 2010, 13:48:00. Port /dev/ttyUSB0 Press CTRL-A Z for help on special keys U-Boot SPL 2012.04.01 (May 18 2012 - 00:04:24) OMAP4430 ES2.2 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.04.01 (May 18 2012 - 00:04:24) CPU : OMAP4430 ES2.2 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 474 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage 5004648 bytes read reading uInitrd 3890478 bytes read reading board.dtb 1747 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5004584 Bytes = 4.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 3890414 Bytes = 3.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 815f0000 Booting using the fdt blob at 0x815f0000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 815f0000, end 815f36d2 Starting kernel ... Uncompressing Linux... done, booting the kernel. -- You received this bug notification because you are a member of TI OMAP Developers, which is subscribed to linaro-landing-team-ti. https://bugs.launchpad.net/bugs/989640 Title: Panda: Device tree support missing Status in Linaro Texas Instruments Landing Team: New Status in Linaro Ubuntu Evaluation Builds: New Bug description: Description: ----------- Device tree support is missing on Panda Ubuntu release: Images: http://snapshots.linaro.org/precise/hwpacks/lt-panda-x11-base/10/hwpack_linaro-lt-panda-x11-base_20120426-10_armhf_supported.tar.gz http://snapshots.linaro.org/precise/images/ubuntu-desktop/119/linaro-precise-ubuntu-desktop-20120426-119.tar.gz root@linaro-ubuntu-desktop:~# ls -l /boot/ total 11628 -rw------- 1 root root 2317914 Apr 25 16:49 System.map-3.3.1-38-linaro-lt-omap -rw-r--r-- 1 root root 610305 Apr 25 16:49 abi-3.3.1-38-linaro-lt-omap -rw-r--r-- 1 root root 105556 Apr 25 16:49 config-3.3.1-38-linaro-lt-omap drwxrwxr-x 2 root root 4096 Apr 27 06:12 dt-3.3.1-38-linaro-lt-omap -rw-r--r-- 1 root root 3885732 Apr 27 06:14 initrd.img-3.3.1-38-linaro-lt-omap -rw------- 1 root root 4975608 Apr 25 16:49 vmlinuz-3.3.1-38-linaro-lt-omap Boot logs: ---------------- U-Boot 2012.04.01 (Apr 25 2012 - 15:17:57) CPU : OMAP4430 ES2.2 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 425 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage 4975672 bytes read reading uInitrd 3885796 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4975608 Bytes = 4.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 3885732 Bytes = 3.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Steps: ---------- https://wiki.linaro.org/Platform/QA/TestCases/Ubuntu#Device_Tree Software: ----------- sd card image created: sudo linaro-media-create --mmc /dev/sdb --dev panda --hwpack hwpack_linaro-lt-panda-x11-base_20120426-10_armhf_supported.tar.gz --binary linaro-precise-ubuntu-desktop-20120426-119.tar.gz Hardware: ---------- Panda 4430 To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-landing-team-ti/+bug/989640/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~tiomap-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~tiomap-dev More help : https://help.launchpad.net/ListHelp
