Jon, Ok, thank you for the response.
Jay ________________________________ From: Jon Maloy <[email protected]> Sent: Tuesday, January 14, 2020 6:50 PM To: [email protected] <[email protected]>; Jay Pelletier <[email protected]> Subject: Re: [tipc-discussion] Disabled port detection Hi Jay, Unfortunately there is no such feature in TIPC. TIPC on node A will detect that the connectivity to all other nodes is lost, and vice versa, but there is no way they can tell *why* this happened. ///Jon On Monday, January 13, 2020, 12:48:47 PM GMT-5, Jay Pelletier <[email protected]> wrote: Hello all, I have a bit of a general question. Is TIPC able to detect when a port on a network switch is disabled? To further illustrate, here is the scenario: A 3 node cluster where each node is connected to one another via a network switch. When the port for the connection of one of the nodes (lets call it Node A) is disabled (not disconnected), Node A is reporting that the status of the bearer still active. Is there any way for Node A to properly report the status of its bearer in this scenario? Thanks in advance, Jay P _______________________________________________ tipc-discussion mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/tipc-discussion _______________________________________________ tipc-discussion mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/tipc-discussion
