Hi Drew,
is pywinkerdaemon intended to work with USB ports? I get: $ ./pywinkeyerdaemon.py -d /dev/ttyUSB1 -p 6788 Traceback (most recent call last): File "./pywinkeyerdaemon.py", line 310, in <module> winkeyer = Winkeyer(args.device) File "./pywinkeyerdaemon.py", line 43, in __init__ self.host_open() File "./pywinkeyerdaemon.py", line 57, in host_open assert self.port.read(1).decode() == test_char AssertionError Joop PG4I Op 26-11-19 om 00:44 schreef Drew Arnett:
Finally knocked off some todos including porting to python3. (still runs on 2 as well) Also, finally added in message +/- controls (tested with TLF) and support for cwdaemon prosigns. (I hadn't been using these sorts of things, so hadn't missed them personally, but they've been on the TODO list too long.) +++TEST--- doesn't work unless there's a setspeed first. (I didn't find that function in the winkeyer interface.) In testing, I found that tlf sends a setspeed command at startup, so no problems. https://github.com/drewarnett/pywinkeyerdaemon Best regards, Drew n7da