Hi Ed, On Wed, May 25, 2022 at 02:07:28PM -0400, Ed wrote: > I use a ic-7300 and have it set to use USB0, but I get no rig control. > > Not sure how to correct this, the 7300 uses a symlink to USB0, so how > do I get this to work ? > > /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge > +_Controller_IC-7300_02038316-if00-port0
this is how I use my USB-serial converter. I have an udev rule: $ cat /etc/udev/rules.d/21-persistent-local.rules ATTRS{manufacturer}=="Prolific Technology Inc.", ATTRS{idVendor}=="0557", ATTRS{idProduct}=="2008", SYMLINK+="rig0" so when I attached the converter (or boot my system), udev creates a device with name /dev/rig0. After that, I can use it in config: RADIO_CONTROL RIGMODEL=2009 RIGSPEED=4800 RIGPORT=/dev/rig0 You have to create your own udev rule for your device. 73, Ervin