Here is some feedback on the text: >-----Original Message----- >From: Barros Pena, Belen >Sent: Thursday, October 23, 2014 6:04 AM >To: [email protected] >Cc: Michael Halstead; [email protected]; Rifenbark, Scott M; Paul >Eggleton >Subject: Changes to the Toaster set up process > >I ran the Toaster set up process by a couple of people, and taking their >feedback into account, I made some changes to the text we show during the >configuration process. All changes are spelled out in detail in a very long >comment in Bugzilla > >https://bugzilla.yoctoproject.org/show_bug.cgi?id=6785#c2 > >In a nutshell, a successful Toaster set up will look like this after the db >user is >set up: > >Verifying the Build Environment
Verifying the Build Environment... > >The Build Environment is not configured: you will be asked to configure it now The Build Environment is not configured. You will be asked to configure it now. > >Step 1 of 3: Toaster needs to know in which directory it should check out the >layers that will be needed for your builds. Toaster suggests " >/home/yocto". If you select this directory, a layer like "meta-yocto" will end >up in "/home/yocto/meta-yocto". Press enter to select " /home/yocto" >or type the full path to a different directory: > >Check out directory saved Checkout directory has been saved. > >Step 2 of 3: Toaster needs to know where is your build directory. The build >directory is where all the artifacts created by your builds will be stored. >Toaster suggests " /home/yocto/poky/build". Press enter to select " >/home/yocto/poky/build" or type the full path to a different directory: Step 2 of 3: Toaster needs to know the location of your build directory. The build directory is where all the artifacts created by your builds will be stored. Toaster suggests "/home/yocto/poky/build". Press Enter to select "/home/yocto/poky/build" or provide the full path to a different directory: > >Build directory saved > >Step 3 of 3: Toaster comes with a default configuration that includes support >for the master branch and 1.7 release of the Yocto Project, and the >OpenEmbedded layer source, i.e. the collection of layers created by the >OpenEmbedded community. Would you like to use this default configuration? >(Y/n): Step 3 of 3: Toaster comes with a default configuration that includes support for the master branch, the 1.7 release of the Yocto Project, and the OpenEmbedded layer source (i.e. the collection of layers created by the OpenEmbedded community). Would you like to use this default configuration? (Y/n): > >Updating the information for the OpenEmbedded layer source. Please wait. Updating the information for the OpenEmbedded layer source. Please wait... > >OpenEmbedded layer source information updated. > >Verifying the Build Environment. Verifying the Build Environment... > > >Starting webserver Starting the webserver... > >Running. Stop with Ctrl+C Toaster is now running. You can stop it with Ctrl+C. > >Opening http://0.0.0.0:8000 > >Feedback on the above text would be much appreciated. > >Thanks! > >Belén > -- _______________________________________________ toaster mailing list [email protected] https://lists.yoctoproject.org/listinfo/toaster
