hgomez 01/05/15 03:00:30
Added: jk/src/native/apache-1.3 build-hpux-cc.sh build-hpux.sh
build-solaris.sh build-unix.sh
Log:
move to apache-1.3
Revision Changes Path
1.1
jakarta-tomcat-connectors/jk/src/native/apache-1.3/build-hpux-cc.sh
Index: build-hpux-cc.sh
===================================================================
#!/bin/sh
# build-hpux.sh for mod_jk.so
#
# Usage: # sh build-hpux.sh
# for hpux 11 using gcc
# Note: See README-hpux for details. This builds mod_jk without JNI support.
#
# Mike Braden
# Update the following according to your installation
APACHE_HOME=/usr/local/apache
JAVA_HOME=/opt/java1.3
#### End of configuration - do not change below
if [ -f $APACHE_HOME/bin/apxs ] ; then
APXS=$APACHE_HOME/bin/apxs
else
echo Error: Unable to locate apxs.
echo Verify that APACHE_HOME is set correctly in this script.
exit 1
fi
if [ ! -d $JAVA_HOME/include/hp-ux ] ; then
echo Error: Unable to locate Java libraries.
echo Verify that JAVA_HOME is set correctly in this script.
exit 1
fi
JAVA_INCLUDE="-I${JAVA_HOME}/include -I${JAVA_HOME}/include/hp-ux"
INCLUDE="-I../common $JAVA_INCLUDE"
#SRC="../common/jk_ajp12_worker.c ../common/jk_ajp13.c ../common/jk_ajp13_worker.c
../common/jk_connect.c ../common/jk_lb_worker.c ../common/jk_map.c
../common/jk_msg_buff.c ../common/jk_nwmain.c ../common/jk_pool.c
../common/jk_sockbuf.c ../common/jk_uri_worker_map.c ../common/jk_util.c
../common/jk_worker.c mod_jk.c"
SRC="../common/*.c mod_jk.c"
# Run APXS to compile the mod_jk module and its components
echo Building mod_jk
$APXS -o mod_jk.so $INCLUDE -c $SRC
# Check to see if the last command completed
if [ $? -ne 0 ] ; then
echo Error with apxs
exit 1
fi
echo mod_jk build complete.
#
# Clean up
#
rm jk_*.o
rm mod_jk.o
echo Configuring apache...
# Use apxs to add the correct lines to httpd.conf
# Since our auto-config does this in the include
# file (mod_jk-conf-auto), we'll add them as
# commented statements for change later if
# we decide not to use the auto-conf.
#
#$APXS -i -a mod_jk.so
$APXS -i -A mod_jk.so
# Check to see if the last command completed
if [ $? -ne 0 ] ; then
echo Error using apxs to add configuration to httpd.conf
exit 1
fi
# Steps to complete install
cat<<END
Build and configuration of mod_jk is complete.
To finish the installation, edit your apache/conf/httpd.conf file and
add the following line to the end of the file:
(Note: Change TOMCAT_HOME to the value of $TOMCAT_HOME)
Include TOMCAT_HOME/conf/jk/mod_jk.conf-auto
Example (/usr/local/apache/conf/httpd.conf):
Include /usr/local/jakarta-tomcat-3.3/conf/jk/mod_jk.conf-auto
Next copy TOMCAT_HOME/conf/jk/workers.properties.unix to
TOMCAT_HOME/conf/jk/workers.properties
Finally, add the apache auto-config setting to Tomcat.
See the release notes for Tomcat 3.3 for information on enabling
the auto-configure script in section 2, Tomcat Configuration:
"To turn these on, add the following modules after the
<AutoWebApp ... /> module in the server.xml file:
Apache configs: <ApacheConfig />"
Example (TOMCAT_HOME/conf/serverl.xml):
<AutoWebApp dir="webapps" host="DEFAULT" />
<ApacheConfig />
For more information, see the mod_jk-howto located in the docs dir
of TOMCAT. (doc/mod_jk-howto.html)
END
1.1 jakarta-tomcat-connectors/jk/src/native/apache-1.3/build-hpux.sh
Index: build-hpux.sh
===================================================================
#!/bin/sh
# build-hpux.sh for mod_jk.so
#
# Usage: # sh build-hpux.sh
# for hpux 11 using gcc
# Note: See README-hpux for details. This builds mod_jk without JNI support.
#
# Mike Braden
# Update the following according to your installation
APACHE_HOME=/usr/local/apache
JAVA_HOME=/opt/java1.3
#### End of configuration - do not change below
if [ -f $APACHE_HOME/bin/apxs ] ; then
APXS=$APACHE_HOME/bin/apxs
else
echo Error: Unable to locate apxs.
echo Verify that APACHE_HOME is set correctly in this script.
exit 1
fi
if [ ! -d $JAVA_HOME/include/hp-ux ] ; then
echo Error: Unable to locate Java libraries.
echo Verify that JAVA_HOME is set correctly in this script.
exit 1
fi
JAVA_INCLUDE="-I${JAVA_HOME}/include -I${JAVA_HOME}/include/hp-ux"
INCLUDE="-I../common $JAVA_INCLUDE"
SRC="../common/jk_ajp12_worker.c ../common/jk_ajp13.c ../common/jk_ajp13_worker.c
../common/jk_connect.c ../common/jk_lb_worker.c ../common/jk_map.c
../common/jk_msg_buff.c ../common/jk_nwmain.c ../common/jk_pool.c
../common/jk_sockbuf.c ../common/jk_uri_worker_map.c ../common/jk_util.c
../common/jk_worker.c mod_jk.c"
# Run APXS to compile the mod_jk module and its components
echo Building mod_jk
$APXS -DHPUX11GCC -o mod_jk.so $INCLUDE -c $SRC
# Check to see if the last command completed
if [ $? -ne 0 ] ; then
echo Error with apxs
exit 1
fi
echo mod_jk build complete.
#
# Clean up
#
rm jk_*.o
rm mod_jk.o
echo Configuring apache...
# Use apxs to add the correct lines to httpd.conf
# Since our auto-config does this in the include
# file (mod_jk-conf-auto), we'll add them as
# commented statements for change later if
# we decide not to use the auto-conf.
#
#$APXS -i -a mod_jk.so
$APXS -i -A mod_jk.so
# Check to see if the last command completed
if [ $? -ne 0 ] ; then
echo Error using apxs to add configuration to httpd.conf
exit 1
fi
# Steps to complete install
cat<<END
Build and configuration of mod_jk is complete.
To finish the installation, edit your apache/conf/httpd.conf file and
add the following line to the end of the file:
(Note: Change TOMCAT_HOME to the value of \$TOMCAT_HOME)
Include TOMCAT_HOME/conf/jk/mod_jk.conf-auto
Example (/usr/local/apache/conf/httpd.conf):
Include /usr/local/jakarta-tomcat-3.3/conf/jk/mod_jk.conf-auto
Next copy TOMCAT_HOME/conf/jk/workers.properties.unix to
TOMCAT_HOME/conf/jk/workers.properties
Finally, add the apache auto-config setting to Tomcat.
See the release notes for Tomcat 3.3 for information on enabling
the auto-configure script in section 2, Tomcat Configuration:
"To turn these on, add the following modules after the
<AutoWebApp ... /> module in the server.xml file:
Apache configs: <ApacheConfig />"
Example (TOMCAT_HOME/conf/serverl.xml):
<AutoWebApp dir="webapps" host="DEFAULT" />
<ApacheConfig />
For more information, see the mod_jk-howto located in the docs dir
of TOMCAT. (doc/mod_jk-howto.html)
END
1.1
jakarta-tomcat-connectors/jk/src/native/apache-1.3/build-solaris.sh
Index: build-solaris.sh
===================================================================
#!/bin/sh
# build-solaris.sh for mod_jk.so
#
# Usage: # sh build-solaris.sh
# for Solaris 8 using GNU gcc
# Note: See README-solaris for details.
#
# Mike Braden
# March 05, 2001
# Update the following according to your installation
APACHE_HOME=/usr/local/apache
JAVA_HOME=/usr/java
#### End of configuration - do not change below
if [ -f $APACHE_HOME/bin/apxs ] ; then
APXS=$APACHE_HOME/bin/apxs
else
echo Error: Unable to locate apxs.
echo Verify that APACHE_HOME is set correctly in this script.
exit 1
fi
if [ ! -d $JAVA_HOME/include/solaris ] ; then
echo Error: Unable to locate Java libraries.
echo Verify that JAVA_HOME is set correctly in this script.
exit 1
fi
JAVA_INCLUDE="-I${JAVA_HOME}/include -I${JAVA_HOME}/include/solaris"
INCLUDE="-I../common $JAVA_INCLUDE"
SRC="../common/*.c mod_jk.c"
# Run APXS to compile the mod_jk module and its components
echo Building mod_jk
$APXS -S CFLAGS="-DSOLARIS -DUSE_EXPAT -I../lib/expat-lite" -o mod_jk.so $INCLUDE
-lposix4 -c $SRC
# Check to see if the last command completed
if [ $? -ne 0 ] ; then
echo Error with apxs
exit 1
fi
echo mod_jk build complete.
#
# Clean up
#
rm jk_*.o
rm mod_jk.o
echo Configuring apache...
# Use apxs to add the correct lines to httpd.conf
# Since our auto-config does this in the include
# file (mod_jk-conf-auto), we'll add them as
# commented statements for change later if
# we decide not to use the auto-conf.
#
#$APXS -i -a mod_jk.so
$APXS -i -A mod_jk.so
# Check to see if the last command completed
if [ $? -ne 0 ] ; then
echo Error using apxs to add configuration to httpd.conf
exit 1
fi
# Steps to complete install
cat<<END
Build and configuration of mod_jk is complete.
To finish the installation, edit your apache/conf/httpd.conf file and
add the following line to the end of the file:
(Note: Change TOMCAT_HOME to the value of \$TOMCAT_HOME)
Include TOMCAT_HOME/conf/jk/mod_jk.conf-auto
Example (/usr/local/apache/conf/httpd.conf):
Include /usr/local/jakarta-tomcat-3.3/conf/jk/mod_jk.conf-auto
Next copy TOMCAT_HOME/conf/jk/workers.properties.unix to
TOMCAT_HOME/conf/jk/workers.properties
Finally, add the apache auto-config setting to Tomcat.
See the release notes for Tomcat 3.3 for information on enabling
the auto-configure script in section 2, Tomcat Configuration:
"To turn these on, add the following modules after the
<AutoWebApp ... /> module in the server.xml file:
Apache configs: <ApacheConfig />"
Example (TOMCAT_HOME/conf/serverl.xml):
<AutoWebApp dir="webapps" host="DEFAULT" />
<ApacheConfig />
For more information, see the mod_jk-howto located in the docs dir
of TOMCAT. (doc/mod_jk-howto.html)
END
1.1 jakarta-tomcat-connectors/jk/src/native/apache-1.3/build-unix.sh
Index: build-unix.sh
===================================================================
#!/bin/sh
# $Id: build-unix.sh,v 1.1 2001/05/15 10:00:29 hgomez Exp $
# build.sh for mod_jk.so
# Usage: build-unix.sh
# Sets a bunch of variables and calls APXS to build mod_jk
# on Unix. An alternative to the makefiles, hopefully more portable.
# Configure by changing the following variables:
# JAVA_HOME is required, but it should be set in the environment, not here
#JAVA_HOME=/usr/local/jdk1.2
# Where your apache lives
if [ -z "$APACHE_HOME" ]
then
echo APACHE_HOME=/usr/local/apache
APACHE_HOME=/usr/local/apache
fi
# name of subdir under JAVA_HOME/jre/lib
ARCH=i386
CFLAGS="-DHAVE_CONFIG_H -g -fpic -DSHARED_MODULE -O2 -D_REENTRANT -pthread -DLINUX
-Wall"
APXS=$APACHE_HOME/bin/apxs
# Find JAVA_HOME
if [ -z "$JAVA_HOME" ]
then
echo "Please set JAVA_HOME"
exit 1
fi
# Figure out INCLUDE directories
# use "find" to pick the right include directories for current machine
JAVA_INCLUDE="`find ${JAVA_HOME}/include -type d -printf \"-I %p \"`" || echo "find
failed, edit build-unix.sh source to fix"
# if "find" fails, use (uncomment) the following instead, substituting your
# platform for "linux"
# JAVA_INCLUDE="-I ${JAVA_HOME}/include -I ${JAVA_HOME}/include/linux"
INCLUDE="-I ../common $JAVA_INCLUDE"
SRC="mod_jk.c ../common/*.c"
#echo INCLUDE=$INCLUDE
#echo SRC=$SRC
# Run APXS to compile module
echo Compiling mod_jk
$APXS -c -o mod_jk.so $INCLUDE $LIB $SRC
# Copy mod_jk.so into the apache libexec directory
echo Installing mod_jk.so into $APACHE_HOME/libexec
cp mod_jk.so $APACHE_HOME/libexec
# Done!
echo "Done. Install by running ./install-unix.sh"