remm 02/04/04 10:16:07
Modified: webapps/tomcat-docs/config http11.xml project.xml
Added: webapps/tomcat-docs/config coyote.xml
Log:
- Add some documenation on Coyote, based on the one for the HTTP/1.1
connector (since there are few user-visible differences at this point).
Revision Changes Path
1.4 +3 -0 jakarta-tomcat-4.0/webapps/tomcat-docs/config/http11.xml
Index: http11.xml
===================================================================
RCS file: /home/cvs/jakarta-tomcat-4.0/webapps/tomcat-docs/config/http11.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- http11.xml 4 Feb 2002 13:36:07 -0000 1.3
+++ http11.xml 4 Apr 2002 18:16:07 -0000 1.4
@@ -16,6 +16,9 @@
<section name="Introduction">
+ <p><b>IMPORTANT NOTE: The HTTP/1.1 connector is now deprecated. Use
+ the Coyote HTTP/1.1 connector instead.</b></p>
+
<p>The <strong>HTTP/1.1 Connector</strong> element represents a
<strong>Connector</strong> component that supports the HTTP/1.1 protocol.
It enables Catalina to function as a stand-alone web server, in addition
1.9 +1 -0 jakarta-tomcat-4.0/webapps/tomcat-docs/config/project.xml
Index: project.xml
===================================================================
RCS file: /home/cvs/jakarta-tomcat-4.0/webapps/tomcat-docs/config/project.xml,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -r1.8 -r1.9
--- project.xml 30 Jan 2002 00:55:27 -0000 1.8
+++ project.xml 4 Apr 2002 18:16:07 -0000 1.9
@@ -22,6 +22,7 @@
</menu>
<menu name="Connectors">
+ <item name="Coyote HTTP/1.1" href="coyote.html"/>
<item name="JK" href="jk.html"/>
<item name="JK 2" href="jk2.html"/>
<item name="HTTP/1.1" href="http11.html"/>
1.1 jakarta-tomcat-4.0/webapps/tomcat-docs/config/coyote.xml
Index: coyote.xml
===================================================================
<?xml version="1.0"?>
<!DOCTYPE document [
<!ENTITY project SYSTEM "project.xml">
]>
<document>
&project;
<properties>
<author email="[EMAIL PROTECTED]">Craig R. McClanahan</author>
<title>The Coyote HTTP/1.1 Connector</title>
</properties>
<body>
<section name="Introduction">
<p>The <strong>Coyote HTTP/1.1 Connector</strong> element represents a
<strong>Connector</strong> component that supports the HTTP/1.1 protocol.
It enables Catalina to function as a stand-alone web server, in addition
to its ability to execute servlets and JSP pages. A particular instance
of this component listens for connections on a specific TCP port number
on the server. One or more such <strong>Connectors</strong> can be
configured as part of a single <a href="service.html">Service</a>, each
forwarding to the associated <a href="engine.html">Engine</a> to perform
request processing and create the response.</p>
<p>If you wish to configure the <strong>Connector</strong> that is used
for connections to web servers using the WARP protocol (such as the
<code>mod_webapp</code> connector for Apache 1.3), see
<a href="webapp.html">here</a> instead.</p>
<p>At server startup time, this <strong>Connector</strong> will create a
number of request processing threads (based on the value configured for
the <code>minProcessors</code> attribute). Each incoming request requires
a thread for the duration of that request. If more simultaneous requests
are received than can be handled by the currently available request
processing threads, additional threads will be created up to the
configured maximum (the value of the <code>maxProcessors</code> attribute).
If still more simultaneous requests are received, they are stacked up
inside the server socket created by the <strong>Connector</strong>, up to
the configured maximum (the value of the <code>acceptCount</code>
attribute. Any further simultaneous requests will receive "connection
refused" errors, until resources are available to process them.</p>
</section>
<section name="Attributes">
<subsection name="Common Attributes">
<p>All implementations of <strong>Connector</strong>
support the following attributes:</p>
<attributes>
<attribute name="className" required="true">
<p>Java class name of the implementation to use. This class must
implement the <code>org.apache.catalina.Connector</code> interface.
You must specify the standard value defined below.</p>
</attribute>
<attribute name="enableLookups" required="false">
<p>Set to <code>true</code> if you want calls to
<code>request.getRemoteHost()</code> to perform DNS lookups in
order to return the actual host name of the remote client. Set
to <code>false</code> to skip the DNS lookup and return the IP
address in String form instead (thereby improving performance).
By default, DNS lookups are enabled.</p>
</attribute>
<attribute name="redirectPort" required="false">
<p>If this <strong>Connector</strong> is supporting non-SSL
requests, and a request is received for which a matching
<code><security-constraint></code> requires SSL transport,
Catalina will automatically redirect the request to the port
number specified here.</p>
</attribute>
<attribute name="scheme" required="false">
<p>Set this attribute to the name of the protocol you wish to have
returned by calls to <code>request.getScheme()</code>. For
example, you would set this attribute to "<code>https</code>"
for an SSL Connector. The default value is "<code>http</code>".
See <a href="#SSL Support">SSL Support</a> for more information.</p>
</attribute>
<attribute name="secure" required="false">
<p>Set this attribute to <code>true</code> if you wish to have
calls to <code>request.isSecure()</code> to return <code>true</code>
for requests received by this Connector (you would want this on an
SSL Connector). The default value is <code>false</code>.</p>
</attribute>
</attributes>
</subsection>
<subsection name="Standard Implementation">
<p>The standard implementation of the <strong>Coyote HTTP/1.1
Connector</strong> is
<strong>org.apache.coyote.tomcat4.CoyoteConnector</strong>.
It supports the following additional attributes (in addition to the
common attributes listed above):</p>
<attributes>
<attribute name="acceptCount" required="false">
<p>The maximum queue length for incoming connection requests when
all possible request processing threads are in use. Any requests
received when the queue is full will be refused. The default
value is 10.</p>
</attribute>
<attribute name="address" required="false">
<p>For servers with more than one IP address, this attribute
specifies which address will be used for listening on the specified
port. By default, this port will be used on all IP addresses
associated with the server.</p>
</attribute>
<attribute name="bufferSize" required="false">
<p>The size (in bytes) of the buffer to be provided for input
streams created by this connector. By default, buffers of
2048 bytes will be provided.</p>
</attribute>
<attribute name="connectionTimeout" required="false">
<p>The number of milliseconds this <strong>Connector</strong> will wait,
after accepting a connection, for the request URI line to be
presented. The default value is 60000 (i.e. 60 seconds).</p>
</attribute>
<attribute name="debug" required="false">
<p>The debugging detail level of log messages generated by this
component, with higher numbers creating more detailed output.
If not specified, this attribute is set to zero (0).</p>
</attribute>
<attribute name="maxProcessors" required="false">
<p>The maximum number of request processing threads to be created
by this <strong>Connector</strong>, which therefore determines the
maximum number of simultaneous requests that can be handled. If
not specified, this attribute is set to 20.</p>
</attribute>
<attribute name="minProcessors" required="false">
<p>The number of request processing threads that will be created
when this <strong>Connector</strong> is first started. This
attribute should be set to a value smaller than that set for
<code>maxProcessors</code>. The default value is 5.</p>
</attribute>
<attribute name="port" required="true">
<p>The TCP port number on which this <strong>Connector</strong>
will create a server socket and await incoming connections. Your
operating system will allow only one server application to listen
to a particular port number on a particular IP address.</p>
</attribute>
<attribute name="proxyName" required="false">
<p>If this <strong>Connector</strong> is being used in a proxy
configuration, configure this attribute to specify the server name
to be returned for calls to <code>request.getServerName()</code>.
See <a href="#Proxy Support">Proxy Support</a> for more
information.</p>
</attribute>
<attribute name="proxyPort" required="false">
<p>If this <strong>Connector</strong> is being used in a proxy
configuration, configure this attribute to specify the server port
to be returned for calls to <code>request.getServerPort()</code>.
See <a href="#Proxy Support">Proxy Support</a> for more
information.</p>
</attribute>
<attribute name="tcpNoDelay" required="false">
<p>If set to <code>true</code>, the TCP_NO_DELAY option will be
set on the server socket, which improves performance under most
circumstances. This is set to <code>true</code> by default.</p>
</attribute>
</attributes>
</subsection>
</section>
<section name="Nested Components">
<p>The only element that may be embedded inside a <strong>Connector</strong>
element is a <strong>Factory</strong> element, which is used to configure
a server socket factory component. See
<a href="#SSL Support">SSL Support</a> for more information about when
this is required.</p>
</section>
<section name="Special Features">
<subsection name="HTTP/1.1 and HTTP/1.0 Support">
<p>This <strong>Connector</strong> supports all of the required features
of the HTTP/1.1 protocol, as described in RFC 2616, including persistent
connections, pipelining, expectations and chunked encoding. If the client
(typically a browser) supports only HTTP/1.0, the
<strong>Connector</strong> will gracefully fall back to supporting this
protocol as well. No special configuration is required to enable this
support. The <strong>Connector</strong> also supports HTTP/1.0
keep-alive.</p>
<p>RFC 2616 requires that HTTP servers always begin their responses with
the highest HTTP version that they claim to support. Therefore, this
<strong>Connector</strong> will always return <code>HTTP/1.1</code> at
the beginning of its responses.</p>
</subsection>
<subsection name="Logging Output">
<p>Any debugging or exception logging information generated by this
<strong>Connector</strong> will be automatically routed to the
<a href="logger.html">Logger</a> that is associated with our related
<a href="engine.html">Engine</a>. No special configuration is required
to enable this support.</p>
</subsection>
<subsection name="Proxy Support">
<p>The <code>proxyName</code> and <code>proxyPort</code> attributes can
be used when Tomcat is run behind a proxy server. These attributes
modify the values returned to web applications that call the
<code>request.getServerName()</code> and <code>request.getServerPort()</code>
methods, which are often used to construct absolute URLs for redirects.
Without configuring these attributes, the values returned would reflect
the server name and port on which the connection from the proxy server
was received, rather than the server name and port to whom the client
directed the original request.</p>
<p>For more information, see the
<a href="../proxy-howto.html">Proxy Support HOW-TO</a>.</p>
</subsection>
<subsection name="SSL Support">
<p>You can enable SSL support for a particular instance of this
<strong>Connector</strong> by nesting an appropriate
<code><Factory></code> element inside, to set up the required
SSL socket factory. This element supports the following attributes:</p>
<attributes>
<attribute name="algorithm" required="false">
<p>The certificate encoding algorithm to be used. If not
specified, the default value is <code>SunX509</code>.</p>
</attribute>
<attribute name="className" required="true">
<p>The fully qualified class name of the SSL server socket
factory implementation class. You must specify
<code>org.apache.catalina.net.SSLServerSocketFactory</code> here.</p>
</attribute>
<attribute name="clientAuth" required="false">
<p>Set to <code>true</code> if you want the SSL stack to
require a valid certificate chain from the client before
accepting a connection. A <code>false</code> value (which
is the default) will not require a certificate chain unless
the client requests a resource protected by a security constraint
that uses <code>CLIENT-CERT</code> authentication.</p>
</attribute>
<attribute name="keystoreFile" required="false">
<p>The pathname of the keystore file where you have stored the
server certificate to be loaded. By default, the pathname is
the file "<code>.keystore</code>" in the operating system home
directory of the user that is running Tomcat.</p>
</attribute>
<attribute name="keystorePass" required="false">
<p>The password used to access the server certificate from the
specified keystore file. The default value is "<code>changeit</code>".
</p>
</attribute>
<attribute name="keystoreType" required="false">
<p>The type of keystore file to be used for the server certificate.
If not specified, the default value is "<code>JKS</code>".</p>
</attribute>
<attribute name="protocol" required="false">
<p>The version of the SSL protocol to use. If not specified,
the default is "<code>TLS</code>".</p>
</attribute>
</attributes>
<p>For more information, see the
<a href="../ssl-howto.html">SSL Configuration HOW-TO</a>.</p>
</subsection>
</section>
</body>
</document>
--
To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]>
For additional commands, e-mail: <mailto:[EMAIL PROTECTED]>