Hi,
When starting apache, following error occurs, any idea why ?
Syntax error on line 4 of
/PTSDEV/jakarta-tomcat-4.1.29/conf/auto/mod_jk.conf:
Cannot load /PTSDEV/httpd-2.0.47/modules/mod_jk.so into server: ld.so.1:
/PTSDEV/httpd-2.0.47/bin/httpd: fatal: relocation error: file
/PTSDEV/httpd-2.0.47/modules/mod_jk.so: symbol ap_psprintf: referenced
symbol not found
Best Regards,
Loh Choon Leng
________________________________________
Chartered Semiconductor Manufacturing Ltd.
60 Woodlands Ind. Park-D St-2 Singapore 738406
Off : +65-63603684 HP : +65-98463801
Email : [EMAIL PROTECTED], Fax : +65-63603816
________________________________________
LOH Choon Leng/Mfg & Plan Sys/CHRT/ST [EMAIL PROTECTED] Domain 07/11/2003 05:18 PM
Please respond to "Tomcat Users List"
To: "Tomcat Users List" <[EMAIL PROTECTED]>
cc: (bcc: LOH Choon Leng/Mfg & Plan Sys/CHRT/ST Group)
Subject: Re: Connector Problem
Hi,
I have downloaded the automake, autoconf, libtool from GNU and installed,
and try to execute the following command to build the connector, however,
following error occur. cannot proceed further ... anyone can help ? I did
not seems to get libtoolize installed when installing the libtool.
$PWD> ./buildconf.sh
libtoolize --force --automake --copy
aclocal
aclocal: configure.in: 22: macro `AM_PROG_LIBTOOL' not found in library
automake -a --foreign -i --copy
configure.in:14: version mismatch. This is Automake 1.7.8,
configure.in:14: but the definition used by this AM_INIT_AUTOMAKE
configure.in:14: comes from Automake 1.6. You should recreate
configure.in:14: aclocal.m4 with aclocal and run automake again.
autoconf
Best Regards,
Loh Choon Leng
________________________________________
Chartered Semiconductor Manufacturing Ltd.
60 Woodlands Ind. Park-D St-2 Singapore 738406
Off : +65-63603684 HP : +65-98463801
Email : [EMAIL PROTECTED], Fax : +65-63603816
________________________________________
[EMAIL PROTECTED] 08/11/2003 03:49 AM
Please respond to "Tomcat Users List"
To: Tomcat Users List <[EMAIL PROTECTED]>
cc: (bcc: LOH Choon Leng/Mfg & Plan Sys/CHRT/ST Group)
Subject: Re: Connector Problem
Hi,
Down load automake, autocon etc from sunfreeware.com and
install it with pkgadd -d command.(download .local.gz files).
Regds
Geetha Thanu
Bioinformatics
CDFD,Hyderabad.
---------REPLY TO-------------
Date:Fri Nov 07 09:53:17 CST 2003
FROM: [EMAIL PROTECTED]
To: Tomcat Users List <[EMAIL PROTECTED]>
Subject: Re: Connector Problem
Hi !
I am using solaris 2.8, will this set of instruction works fine as well
?
where do I get rpm : autmake, autoconfig, m4 libtool from ?
Best Regards,
Loh Choon Leng
________________________________________
Chartered Semiconductor Manufacturing Ltd.
60 Woodlands Ind. Park-D St-2 Singapore 738406
Off : +65-63603684 HP : +65-98463801
Email : [EMAIL PROTECTED], Fax : +65-63603816
________________________________________
Chong Yu Meng <[EMAIL PROTECTED]> 07/11/2003 09:28 AM
Please respond to "Tomcat Users List"
To: Tomcat Users List <[EMAIL PROTECTED]>
cc: (bcc: LOH Choon Leng/Mfg & Plan Sys/CHRT/ST Group)
Subject: Re: Connector Problem
Hello!
I have a set of instructions that may help you (see
http://www.cymulacrum.net/tomcat/jk2_compile.html). Just updated it
yesterday.
Are you using Linux or Solaris. If Linux, my instructions cover the
following configuration : Apache 2.0.47 (rpm) + Tomcat 4.1.29 + mod_jk2.
I used to work for your competitor across the street in Woodlands (TECH
Semiconductor) several years ago.
Regards,
pascal chong
[EMAIL PROTECTED] wrote:
>When following the following procedure to build the connector,
>
>Building
>========
>
>* Install tomcat(3.3, 4.0, 4.1). Install Apache(1.3, 2.0). Any
>combination is fine, but j-t-c developers should have them all.
>
>* Copy build.properties.sample to build.properties
>
>* Edit build.properties to taste. In particular it's important to set
>the paths to tomcat and apache.
>
>* Run "ant". It'll build modules for all the detected containers.
>
>* If your system have a current working version of libtool, run "ant
>native".
> This will build the native connectors for the detected servers ( both
jk
> and jk2).
>
> Alternatively, you can build using configure/make/dsp/apxs.
>
>* Run "ant install". This will copy the files in the right location
> in your server/container. Optional: on unix systems you can create
> symlinks ( XXX script will be provided ) and avoid copying.
>
>
>Following error occur, pls help ...
>
>
>
>$PWD> $ANT_HOME/bin/ant
>Buildfile: build.xml
>
>init:
> [echo] /
>
>apache20:
>
>apache13:
> [so] Compiling 18 out of 18
>Compiling
>/PTSDEV/jakarta-tomcat-connectors-4.1.27-src/jk/native/common/jk_msg_buff.c
>
>BUILD FAILED
>file:/PTSDEV/jakarta-tomcat-connectors-4.1.27-src/jk/native/build.xml:222:
>java.io.IOException: libtool: not found
>
>Total time: 2 seconds
>
>
>Best Regards,
>Loh Choon Leng
>________________________________________
>Chartered Semiconductor Manufacturing Ltd.
>60 Woodlands Ind. Park-D St-2 Singapore 738406
>Off : +65-63603684 HP : +65-98463801
>Email : [EMAIL PROTECTED], Fax : +65-63603816
>________________________________________
>
>
>David Rees <[EMAIL PROTECTED]> 05/11/2003 02:49 PM
>Please respond to "Tomcat Users List"
>
> To: Tomcat Users List <[EMAIL PROTECTED]>
> cc: (bcc: LOH Choon Leng/Mfg & Plan Sys/CHRT/ST Group)
> Subject: Re: Connector Problem
>
>
>
>
>
>
>
>
>[EMAIL PROTECTED] wrote:
>
>
>>Trying to build the connector, got the following error, anyone can help?
>>
>>$PWD> ./buildconf.sh
>>libtoolize --force --automake --copy
>>./buildconf.sh: libtoolize: not found
>>aclocal
>>./buildconf.sh: aclocal: not found
>>automake -a --foreign -i --copy
>>./buildconf.sh: automake: not found
>>autoconf
>>./buildconf.sh: autoconf: not found
>>
>>
>
>You need to have the tools automake and autoconf installed on your
>system to run buildconf.sh. But in recent bundled of
>jakarta-tomcat-connectors, you might be able to skip that step and just
>run ./configure.
>
>-Dave
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: [EMAIL PROTECTED]
>For additional commands, e-mail: [EMAIL PROTECTED]
>
>
>
>
>
>[This e-mail is confidential and may also be privileged. If you are not
the
>intended recipient, please delete it and notify us immediately; you should
>not copy or use it for any purpose, nor disclose its contents to any other
>person. Thank you.]
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: [EMAIL PROTECTED]
>For additional commands, e-mail: [EMAIL PROTECTED]
>
>
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
[This e-mail is confidential and may also be privileged. If you are not
the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
