did u configure DNS in advanced properties of tcp/ip???
Pavan Kumar
Tata Consultancy Services
Mailto: [EMAIL PROTECTED]
Website: http://www.tcs.com
"Sunit Bansal"
<[EMAIL PROTECTED]>
02/18/2004 05:46 AM
|
|
Thanks.
I tried that and got some break through.
Now instead of "error code 2" ping 127.0.0.1, gives "Destination
unreachable"
and for ping localhost, it gives unknown host name.
Also "ipcongif" still doesnt work.
-Sunit
-----Original Message-----
From: Parsons Technical Services [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 18, 2004 11:28 AM
To: Tomcat Users List
Subject: Re: PROBLEM STARTING TOMCAT----------------PLEASE HELP
Sunit,
This is moving off topic for the list, but here it goes.
First READ all of these instruction. You may find your problem without
having to go through all these steps.
Open Network Connections.
One at a time right click a network device and select properties.
Select uninstall.
Do this for all connections.
This will cause any network connections to stop functioning(doesn't sound
like they currently are so no problem)
Reboot the machine.
If you have a NIC card then windows should detect it and install the
drivers.
Return to Network Connections.
Follow these instructions to reinstall the loopback driver:
To manually install the adapter, follow the steps below:
Click Start, and choose Control Panel
Double-click Add Hardware and then click Next.
Select Yes, I have already connected the hardware, and then click Next.
Scroll down and click Add a new hardware device, and then click Next.
Select Install the hardware that I manually select from a list, and then
click Next.
Click Network adapters, and then click Next.
In the Manufacturers box, click Microsoft.
In the Network Adapter box, click Microsoft Loopback Adapter, and then click
Next.
Click Next once more and then click Finish.
After the adapter is installed successfully, you can configure its options
manually, as with any other adapter. You need to allocate a TCP/IP address.
To manually configure the adapter's options:
Select Start | Control Panel and then choose Network Connections.
Choose Local Area Connection 2 and click Change settings of this connection
Highlight Internet Protocol (TCP/IP) and then click Properties.
Here you can configure the IP address and Subnet Mask.
Set IP to something like 192.168.0.2
Make sure connection is Enabled when viewed from Network Connections.
You should see the IP in the Details window located in the lower left of the
window when you select the connection. Until you have this fixed you will be
unable to get TC to run. If after this you are still unable to get a ping
127.0.0.1 to work then you have some issues that need resolved and are off
topic for the list (IMHO).
Good Luck
Doug
www.parsonstechnical.com
> TCP/IP is already installed using MS loop back adapter.
>
> In command promt I tried doing ipcofig: it gives error
> Also ping localhost, ping 127.0.0.0, ping 127.0.0.1 gives following error
> "Unable to contact IP driver, error code 2"
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
ForwardSourceID:NT0000666E
DISCLAIMER: The information contained in this message is intended only and solely for the addressed individual or entity indicated in this message and for the exclusive use of the said addressed individual or entity indicated in this message (or responsible for delivery of the message to such person) and may contain legally privileged and confidential information belonging to Tata Consultancy Services. It must not be printed, read, copied, disclosed, forwarded, distributed or used (in whatsoever manner) by any person other than the addressee. Unauthorized use, disclosure or copying is strictly prohibited and may constitute unlawful act and can possibly attract legal action, civil and/or criminal. The contents of this message need not necessarily reflect or endorse the views of Tata Consultancy Services on any subject matter. Any action taken or omitted to be taken based on this message is entirely at your risk and neither the originator of this message nor Tata Consultancy Services takes any responsibility or liability towards the same. Opinions, conclusions and any other information contained in this message that do not relate to the official business of Tata Consultancy Services shall be understood as neither given nor endorsed by Tata Consultancy Services or any affiliate of Tata Consultancy Services. If you have received this message in error, you should destroy this message and may please notify the sender by e-mail. Thank you.
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]