As far as I know Jserv has been deprecated or is no longer in development and has migrated over to mod_jk, open to correction though.
Kind Regards Schalk Neethling Web Developer.Designer.Programmer.President Volume4.Development.Multimedia.Branding emotionalize.conceptualize.visualize.realize Tel: +27125468436 Fax: +27125468436 email:[EMAIL PROTECTED] web: www.volume4.com This message contains information that is considered to be sensitive or confidential and may not be forwarded or disclosed to any other party without the permission of the sender. If you received this message in error, please notify me immediately so that I can correct and delete the original email. Thank you. :: -----Original Message----- :: From: Schalk [mailto:[EMAIL PROTECTED] :: Sent: Sunday, April 04, 2004 10:04 PM :: To: 'Tomcat Users List' :: Subject: RE: cannot get servlet mapping working under 3.3 :: :: I would suggest you upgrade to Tomcat 5.0+ and mod_jk :: :: Kind Regards :: Schalk Neethling :: Web Developer.Designer.Programmer.President :: Volume4.Development.Multimedia.Branding :: emotionalize.conceptualize.visualize.realize :: Tel: +27125468436 :: Fax: +27125468436 :: email:[EMAIL PROTECTED] :: web: www.volume4.com :: :: This message contains information that is considered to be sensitive or :: confidential and may not be forwarded or disclosed to any other party :: without the permission of the sender. If you received this message in error, :: please notify me immediately so that I can correct and delete the original :: email. Thank you. :: :: :: -----Original Message----- :: :: From: C. Kukulies [mailto:[EMAIL PROTECTED] :: :: Sent: Sunday, April 04, 2004 9:55 PM :: :: To: [EMAIL PROTECTED] :: :: Subject: cannot get servlet mapping working under 3.3 :: :: :: :: I'm reconvalescing from a disc crash where lots of my existing :: :: tomcat 3.1/apache 1.3.26 installation had crashed and I :: :: reinstalled tomcat 3.3 with apache-1.3.27 now such that :: :: the examples work when I connect to the server at port 8080. :: :: But this is tomcat. Trying to connect to apache via the jserv :: :: modules doesn't seem to work. :: :: :: :: logs/stderr.log looks ok. :: :: :: :: I have included apache/jserv/jserv.conf at the end of httpd.conf :: :: :: :: :: :: jserv.conf: :: :: :: #################################################### :: :: ########################### :: :: :: :: :: #################################################### :: :: ########################### :: :: :: :: # Note: this file should be appended or included into your httpd.conf :: :: :: :: # Tell Apache on win32 to load the Apache JServ communication module :: :: #LoadModule jserv_module modules/ApacheModuleJServ.dll :: :: :: :: # Tell Apache on Unix to load the Apache JServ communication module :: :: # For shared object builds only!!! :: :: LoadModule jserv_module /usr/local/libexec/apache/mod_jserv.so :: :: :: :: <IfModule mod_jserv.c> :: :: :: :: # Whether Apache must start Apache JServ or not (On=Manual Off=Autostart) :: :: # Syntax: ApJServManual [on/off] :: :: # Default: "Off" :: :: ApJServManual Off :: :: :: :: # Properties filename for Apache JServ in Automatic Mode. :: :: # In manual mode this directive is ignored :: :: # Syntax: ApJServProperties [filename] :: :: # Default: "./conf/jserv.properties" :: :: ApJServProperties /usr/local/etc/apache/jserv/jserv.properties :: :: :: :: # Log file for this module operation relative to Apache root directory. :: :: # Set the name of the trace/log file. To avoid possible confusion about :: :: # the location of this file, an absolute pathname is recommended. :: :: # :: :: # This log file is different than the log file that is in the :: :: # jserv.properties file. This is the log file for the C portion of Apache :: :: # JServ. :: :: # :: :: # On Unix, this file must have write permissions by the owner of the JVM :: :: # process. In other words, if you are running Apache JServ in manual mode :: :: # and Apache is running as user nobody, then the file must have its :: :: # permissions set so that that user can write to it. :: :: # Syntax: ApJServLogFile [filename] :: :: # Default: "./logs/mod_jserv.log" :: :: # Note: when set to "DISABLED", the log will be redirected to Apache :: error log :: :: ApJServLogFile /var/log/mod_jserv.log :: :: :: :: # Log Level for this module :: :: # Syntax: ApJServLogLevel [debug|info|notice|warn|error|crit|alert|emerg] :: :: # Default: info (unless compiled w/ JSERV_DEBUG, in which case it's :: debug) :: :: ApJServLogLevel debug :: :: :: :: # Protocol used by this host to connect to Apache JServ :: :: # (see documentation for more details on available protocols) :: :: # Syntax: ApJServDefaultProtocol [name] :: :: # Default: "ajpv12" :: :: ApJServDefaultProtocol ajpv12 :: :: :: :: # Default host on which Apache JServ is running :: :: # Syntax: ApJServDefaultHost [hostname] :: :: # Default: "localhost" :: :: #ApJServDefaultHost java.apache.org :: :: :: :: # Default port that Apache JServ is listening to :: :: # Syntax: ApJServDefaultPort [number] :: :: # Default: protocol-dependant (for ajpv12 protocol this is "8007") :: :: ApJServDefaultPort 8007 :: :: :: :: # The amount of time to give to the JVM to start up as well :: :: # as the amount of time to wait to ping the JVM to see if it :: :: # is alive. Slow or heavily loaded machines might want to :: :: # increase this value. :: :: # Default: 10 seconds :: :: # ApJServVMTimeout 10 :: :: :: :: # Passes parameter and value to specified protocol. :: :: # Syntax: ApJServProtocolParameter [name] [parameter] [value] :: :: # Default: NONE :: :: # Note: Currently no protocols handle this. Introduced for future :: protocols. :: :: :: :: # Apache JServ secret key file relative to Apache root directory. :: :: # Syntax: ApJServSecretKey [filename] :: :: # Default: "./conf/jserv.secret.key" :: :: # Warning: if authentication is DISABLED, everyone on this machine (not :: just :: :: # this module) may connect to your servlet engine and execute servlet :: :: # bypassing web server restrictions. See the documentation for more :: information :: :: #ApJServSecretKey /usr/local/etc/apache/jserv/jserv.secret.key :: :: ApJServSecretKey DISABLED :: :: :: :: # Mount point for Servlet zones :: :: # (see documentation for more information on servlet zones) :: :: # Syntax: ApJServMount [name] [jserv-url] :: :: # Default: NONE :: :: # Note: [name] is the name of the Apache URI path to mount jserv-url on :: :: # [jserv-url] is something like "protocol://host:port/zone" :: :: # If protocol, host or port are not specified, the values from :: :: # "ApJServDefaultProtocol", "ApJServDefaultHost" or "ApJServDefaultPort" :: :: # will be used. :: :: # If zone is not specified, the zone name will be the first subdirectory :: of :: :: # the called servlet. :: :: # Example: "ApJServMount /servlets /myServlets" :: :: # if user requests "http://host/servlets/TestServlet"; :: :: # the servlet "TestServlet" in zone "myServlets" on default host :: :: # thru default protocol on defaul port will be requested :: :: # Example: "ApJServMount /servlets ajpv12://localhost:8007" :: :: # if user requests "http://host/servlets/myServlets/TestServlet"; :: :: # the servlet "TestServlet" in zone "myServlets" will be requested :: :: # Example: "ApJServMount /servlets :: :: ajpv12://jserv.mydomain.com:15643/myServlets" :: :: # if user requests "http://host/servlets/TestServlet"; the servlet :: :: # "TestServlet" in zone "myServlets" on host "jserv.mydomain.com" using :: :: # "ajpv12" protocol on port "15643" will be executed :: :: #ApJServMount /servlets /root :: :: #ApJServMount /servlet /root :: :: #+++ :: :: # CPK :: :: Alias /servlets /usr/local/jakarta-tomcat3.3/webapps/servlets :: :: <Directory "/usr/local/jakarta-tomcat3.3/webapps/servlets"> :: :: Options Indexes FollowSymLinks :: :: </Directory> :: :: ApJServMount /servlets/servlet /servlets :: :: <Location /servlets/WEB-INF/ > :: :: AllowOverride None :: :: deny from all :: :: </Location> :: :: :: :: ApJServMount /servlet /ROOT :: :: :: :: :: :: # CPK :: :: #--- :: :: # :: :: :: :: # Whether <VirtualHost> inherits base host mount points or not :: :: # Syntax: ApJServMountCopy [on/off] :: :: # Default: "On" :: :: # Note: This directive is meaninful only when virtual hosts are being :: used :: :: ApJServMountCopy on :: :: :: :: # Executes a servlet passing filename with proper extension in :: PATH_TRANSLATED :: :: # property of servlet request. :: :: # Syntax: ApJServAction [extension] [servlet-uri] :: :: # Defaults: NONE :: :: # Notes: This is used for external tools. :: :: #ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet :: :: #ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet :: :: #ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI :: :: #ApJServAction .xml /servlets/org.apache.cocoon.Cocoon :: :: :: :: # Enable the Apache JServ status handler with the URL of :: :: # "http://servername/jserv/"; (note the trailing slash!) :: :: # Change the "deny" directive to restrict access to this status page. :: :: <Location /jserv/> :: :: SetHandler jserv-status :: :: :: :: order deny,allow :: :: deny from all :: :: allow from 127.0.0.1 :: :: </Location> :: :: :: :: :: :: :: :: ############################## W A R N I N G :: :: ################################## :: :: # Remember to disable or otherwise protect the execution of the Apache :: JServ # :: :: # Status Handler (see right above) on a production environment since this :: may # :: :: # give untrusted users the ability to obtain restricted information on :: your # :: :: # servlets and their initialization arguments such as JDBC passwords and :: # :: :: # other important information. The Apache JServ Status Handler should be :: # :: :: # accessible only by system administrators. :: # :: :: :: #################################################### :: :: ########################### :: :: :: :: </IfModule> :: :: :: :: server.xml: :: :: :: :: <?xml version="1.0" encoding="ISO-8859-1"?> :: :: <Server> :: :: :: :: <!-- You can add a "home" attribute to represent the "base" for :: :: all relative paths. If none is set, the TOMCAT_HOME property :: :: will be used, and if not set "." will be used. :: :: webapps/, work/ and log/ will be relative to this ( unless :: :: set explicitely to absolute paths ). :: :: --> :: :: <ContextManager workDir="work" > :: :: :: :: <!-- ==================== Global modules :: :: ==================== --> :: :: <LoaderInterceptor11 useApplicationLoader="true" /> :: :: :: :: <TrustedLoader /> :: :: :: :: <LogSetter name="tc_log" timestamps="true" :: :: verbosityLevel="INFORMATION" /> :: :: :: :: <LogEvents enabled="false" /> :: :: :: :: <!-- Backward compat: read the Context declarations from :: server.xml--> :: :: <ContextXmlReader config="conf/server.xml" /> :: :: :: :: <!-- Separated Context --> :: :: <ContextXmlReader config="conf/apps.xml" /> :: :: :: :: <AutoDeploy source="modules" target="modules" :: :: redeploy="true" /> :: :: :: :: <AutoWebApp dir="modules" host="DEFAULT" trusted="true"/> :: :: :: :: <AutoDeploy source="webapps" target="webapps" /> :: :: :: :: <AutoWebApp dir="webapps" host="DEFAULT" /> :: :: :: :: <PolicyLoader securityManagerClass="java.lang.SecurityManager" :: :: policyFile="conf/tomcat.policy" /> :: :: :: :: <SimpleMapper1 /> :: :: :: :: <SessionExpirer checkInterval="60" /> :: :: <!-- For development you can use randomClass="java.util.Random" :: --> :: :: <SessionIdGenerator randomClass="java.security.SecureRandom" :: :: randomFile="/dev/urandom" /> :: :: :: :: :: :: <!-- ========== context processing modules ========== --> :: :: :: :: <!-- This will be the "default" profile :: :: ( all except the "global" modules can be set per context ) :: :: --> :: :: <LogSetter name="servlet_log" :: :: timestamps="true" :: :: verbosityLevel = "INFORMATION" :: :: path="logs/servlet-${yyyyMMdd}.log" :: :: /> :: :: :: :: <LogSetter name="JASPER_LOG" :: :: timestamps="true" :: :: path="logs/jasper-${yyyyMMdd}.log" :: :: verbosityLevel = "INFORMATION" /> :: :: :: :: <WebXmlReader validate="true" /> :: :: :: :: <ErrorHandler showDebugInfo="true" /> :: :: :: :: <WorkDirSetup cleanWorkDir="false" /> :: :: :: :: <Jdk12Interceptor /> :: :: :: :: <!-- Non-standard invoker, for backward compat. ( /servlet/* ) :: --> :: :: <InvokerInterceptor /> :: :: :: :: <!-- you can add javaCompiler="jikes" --> :: :: <JspInterceptor keepGenerated="true" :: :: largeFile="false" :: :: useJspServlet="false" :: :: /> :: :: :: :: <StaticInterceptor listings="true" :: :: useAcceptLanguage="true" :: :: useCharset="locale" /> :: :: :: :: <ReloadInterceptor fullReload="true" /> :: :: :: :: <SimpleSessionStore maxActiveSessions="-1" /> :: :: :: :: <AccessInterceptor /> :: :: :: :: <CredentialsInterceptor /> :: :: :: :: <SimpleRealm filename="conf/users/global-users.xml" /> :: :: :: :: <!-- UnComment the following and comment out the :: :: above to get a JDBC realm. :: :: Other options for driverName: :: :: driverName="oracle.jdbc.driver.OracleDriver" :: :: connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL" :: :: connectionName="scott" :: :: connectionPassword="tiger" :: :: :: :: driverName="org.gjt.mm.mysql.Driver" :: :: connectionURL="jdbc:mysql://localhost/authority" :: :: connectionName="test" :: :: connectionPassword="test" :: :: :: :: "connectionName" and "connectionPassword" are optional. :: :: --> :: :: <!-- :: :: <JDBCRealm :: :: debug="99" :: :: driverName="sun.jdbc.odbc.JdbcOdbcDriver" :: :: connectionURL="jdbc:odbc:TOMCAT" :: :: userTable="users" :: :: userNameCol="user_name" :: :: userCredCol="user_pass" :: :: userRoleTable="user_roles" :: :: roleNameCol="role_name" /> :: :: --> :: :: :: :: <LoadOnStartupInterceptor /> :: :: :: :: <Servlet22Interceptor /> :: :: :: :: :: :: <!-- Tag pooling support. :: :: To enable the reuse of tag handlers as described in :: :: the JSP spec, uncomment the following. If your pages :: :: use a lot of custom tags, you should see a nice performance :: :: gain. :: :: :: :: Note that placing the interceptor here will enable :: :: Tag pooling for all of the web applicatitions loaded - :: :: this may be a bad thing if all tags are not coded to :: :: handle reuse. To enable pooling only for specific web :: :: applications i.e. Contexts, place the interceptor inside of :: :: the Context's definition. :: :: :: :: To view information about tag usage uncomment the tag :: :: LogSetter. Set verbosityLevel to DEBUG to see everytime :: :: a tag is obtained and released. :: :: --> :: :: <!-- :: :: <LogSetter name="tag_pool_log" timestamps="true" :: :: path="logs/tagpool-${yyyyMMdd}.log" :: :: verbosityLevel="INFORMATION" /> :: :: :: :: <TagPoolManagerInterceptor /> :: :: --> :: :: :: :: <!-- Request processing --> :: :: :: :: <DecodeInterceptor /> :: :: :: :: <!-- If you are running SSL and wish to verify Tomcat sessions :: :: against SSL sessions, use checkSSLSessionId="true" :: :: Default is checkSSLSessionId="false" --> :: :: <SessionId cookiesFirst="true" noCookies="false" /> :: :: :: :: <!-- Automatic config generation :: :: Set noRoot="false" if you wish to have Tomcat try to take :: :: control of the external web server's root context. :: :: Additonal configuration of the external web server may be :: :: required for this to be successful. :: :: Note: Configuration files are not written as part of the :: :: default startup behvior. Append "jkconf" to the startup :: :: command to have Tomcat initialize, write the config files, :: :: then exit. This may be done while Tomcat is running. :: :: --> :: :: <ApacheConfig noRoot="true" /> :: :: <IISConfig noRoot="true" /> :: :: <NSConfig noRoot="true" /> :: :: :: :: <!-- Uncoment for apache-style logs :: :: Attributes: logFile, flush, format :: :: <AccessLogInterceptor/> :: :: --> :: :: <!-- ==================== Connectors :: :: ==================== --> :: :: :: :: <!-- new http adapter. Attributes: :: :: secure - use SSL ( https ) :: :: keystore, keypass - certs for SSL :: :: port :: :: reportedname - Server name to send back to browser :: :: by default report Tomcat Web Server ... :: :: set an empty string to avoid sending server :: header :: :: --> :: :: <Http10Connector port="8080" :: :: secure="false" :: :: maxThreads="100" :: :: maxSpareThreads="50" :: :: minSpareThreads="10" /> :: :: :: :: <!-- :: :: Uncomment this for SSL support. You _need_ to set up a :: :: server certificate if you want this to work, and you :: :: need JSSE. See tomcat-ssl-howto.html for more detailed :: :: instructions. :: :: :: :: 1. Make the JSSE jars available to Tomcat, either by making :: :: them an installed extension or by adding them to the :: :: Tomcat CLASSPATH. :: :: 2. Do: keytool -genkey -alias tomcat -keyalg RSA :: :: RSA is essential to work with Netscape and IIS. :: :: Use "changeit" as password. ( or add keypass attribute ) :: :: You don't need to sign the certificate. :: :: --> :: :: <!-- :: :: <Http10Connector port="8443" secure="true" /> :: :: --> :: :: :: :: <!-- :: :: JNI connector. It assumes the library is located in :: :: TOMCAT_HOME/bin/native/jni_connect.[dll, nlm, so]. or in :: :: LD_LIBRARY_PATH. :: :: For different paths set "nativeLibrary" parameter. :: :: :: :: The JniConnector will be self-enable only if JNI mode is :: detected. :: :: --> :: :: <JniConnector /> :: :: :: :: <!-- Apache AJP12 support. This is also used to shut down tomcat. :: :: Parameter "address" defines network interface this :: Interceptor :: :: "binds" to. Add it if you want to "bind" to just :: "127.0.0.1". :: :: :: :: address="127.0.0.1" :: :: :: :: Parameter "tomcatAuthentication", controls if Tomcat honors :: :: ( and uses ) auth done in HTTP Server or not, when true :: Tomcat does :: :: not use in any way auth information provided by the HTTP :: Server. :: :: true is the default. :: :: :: :: tomcatAuthentication="false" :: :: :: :: --> :: :: <Ajp12Connector port="8007" /> :: :: :: :: <!-- Apache AJP13 support (mod_jk) :: :: Parameter "address" defines network interface this :: Interceptor :: :: "binds" to. Add it if you want to "bind" to just :: "127.0.0.1". :: :: :: :: address="127.0.0.1" :: :: :: :: Parameter "tomcatAuthentication", controls if Tomcat honors :: :: ( and uses ) auth done in HTTP Server or not, when true :: Tomcat does :: :: not use in any way auth information provided by the HTTP :: Server. :: :: true is the default. :: :: :: :: tomcatAuthentication="false" :: :: :: :: :: :: --> :: :: <Ajp13Connector port="8009" /> :: :: :: :: <!-- :: :: Context definitions can be placed here ( not recommended ) or :: :: in separate files. The ContextXmlReader will read all context :: :: definitions ( you can customize the "base" filename ). :: :: :: :: The default is conf/apps-[name].xml. :: :: :: :: See conf/apps-examples.xml and conf/apps-admin.xml :: :: --> :: :: <!-- example - how to override AutoSetup actions --> :: :: <Context path="/examples" docBase="webapps/examples" debug="0" :: :: reloadable="true" > :: :: </Context> :: :: :: :: :: :: <!-- example - how to override AutoSetup actions --> :: :: <Context path="/servlets" docBase="webapps/servlets" debug="0" :: :: reloadable="true" > :: :: </Context> :: :: <Context path="" docBase="/usr/local/www/data" > :: :: </Context> :: :: :: :: </ContextManager> :: :: </Server> :: :: :: :: Is tomcat.conf part of the game? I'd think not since it is not included :: in :: :: httpd.conf. :: :: :: :: :: :: Thanks for helping. :: :: :: :: -- :: :: Chris Christoph P. U. Kukulies kuku_at_physik.rwth-aachen.de :: :: :: :: :: :: :: :: --------------------------------------------------------------------- :: :: To unsubscribe, e-mail: [EMAIL PROTECTED] :: :: For additional commands, e-mail: [EMAIL PROTECTED] :: :: :: :: --------------------------------------------------------------------- :: To unsubscribe, e-mail: [EMAIL PROTECTED] :: For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
