I so much appreciate all your hard work helping me out... I have one problem and i know that i am almost there...
I did like you said with the listeners... here is the new problem... when I start up apache i get the following error: Syntax error on line 28 of /usr/local/tomcat/conf/auto/mod_jk.conf: Invalid command 'JkMount', perhaps mis-spelled or defined by a module not included in the server configuration /usr/local/apache/bin/apachectl start: httpd could not be started What can i do now? On Fri, 2002-11-08 at 22:04, Turner, John wrote: > > The first one immediately after Server, the second one (with "forwardAll") > immediately after Host. > > John > > > > -----Original Message----- > > From: .: B i g D o g :. [mailto:bigdog@;venticon.com] > > Sent: Friday, November 08, 2002 10:00 AM > > To: Tomcat Users List > > Subject: RE: Apache + Tomcat Installation > > > > > > And those listeners would be put in the server.xml file under <Server> > > or <Server> and <Host>? > > > > > > > > On Fri, 2002-11-08 at 21:53, Turner, John wrote: > > > > > > Tomcat will only serve HTTP requests on the HTTP Connector, > > which defaults > > > to 8080. Port 8005 is the port for the Server element, it > > should be that > > > way by default. > > > > > > There is one Listener that calls ApacheConfig at the Server > > level, and one > > > for each Host element, if you want to use AutoConfig. > > > > > > "workersConfig" is a parameter to a Listener element. If > > you want to be > > > thorough, you would have two Listener elements, like this: > > > > > > <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" > > > modJk="/your/path/to/apache/libexec-or-modules/mod_jk.so" > > > workersConfig="/your/path/to/workers.properties" /> > > > > > > and one like this: > > > > > > <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" > > > append="true" forwardAll="false" > > > modJk="/your/path/to/apache/libexec-or-modules/mod_jk.so" > > > workersConfig="/your/path/to/workers.properties" /> > > > > > > John > > > > > > > > > > -----Original Message----- > > > > From: .: B i g D o g :. [mailto:bigdog@;venticon.com] > > > > Sent: Friday, November 08, 2002 9:43 AM > > > > To: Tomcat Users List > > > > Subject: RE: Apache + Tomcat Installation > > > > > > > > > > > > I changed the port in the server.xml file...and that port > > > > does not work > > > > when i try to access tomcat on it... > > > > > > > > Where are the ApacheConfig Listener elements and the workersConfig > > > > listener? > > > > > > > > > > > > On Fri, 2002-11-08 at 21:40, Turner, John wrote: > > > > > > > > > > I would add > > > > modJk="/your/path/to/apache/libexec-or-modules/mod_jk.so" to > > > > > each of your ApacheConfig Listener elements. > > > > > > > > > > You could also add > > > > workersConfig="/your/path/to/workers.properties" to the > > > > > same Listener elements. > > > > > > > > > > Restart Tomcat and see what happens. > > > > > > > > > > When you say you changed the port to 8005, which port did > > > > you change? It > > > > > might not be necessary. > > > > > > > > > > John > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: .: B i g D o g :. [mailto:bigdog@;venticon.com] > > > > > > Sent: Friday, November 08, 2002 9:33 AM > > > > > > To: Tomcat Users List > > > > > > Subject: RE: Apache + Tomcat Installation > > > > > > > > > > > > > > > > > > John, > > > > > > > > > > > > Thank you again for your time and patience...it is much > > > > appreciated. > > > > > > > > > > > > > > > > > > yep the permissions are all correct... > > > > > > > > > > > > When i start tomcat this is what i get... > > > > > > Using CATALINA_BASE: /usr/local/tomcat > > > > > > Using CATALINA_HOME: /usr/local/tomcat > > > > > > Using CATALINA_TMPDIR: /usr/local/tomcat/temp > > > > > > Using JAVA_HOME: /usr/local/java > > > > > > > > > > > > And nothing in the conf directory. > > > > > > > > > > > > I did change the port to 8005 like your tutorial. > > > > > > > > > > > > Removed the catalina.out file. > > > > > > Stopped and restarted Tomcat. > > > > > > > > > > > > Now this is where i might need your help...this is the > > > > catalina.out > > > > > > file: > > > > > > > > > > > > [INFO] Registry - -Loading registry information > > > > > > [INFO] Registry - -Creating new Registry instance > > > > > > [INFO] Registry - -Creating MBeanServer > > > > > > [INFO] Http11Protocol - -Initializing Coyote HTTP/1.1 > > on port 8080 > > > > > > mod_jk location: libexec/mod_jk.so > > > > > > Make sure it is installed corectly or set the config location > > > > > > Using <ApacheConfig modJk="PATH_TO_MOD_JK.SO_OR_DLL" /> > > > > > > Can't find workers.properties at > > > > > > /usr/local/tomcat/conf/jk/workers.properties > > > > > > Please install it in the default location or set the > > > > config location > > > > > > Using <ApacheConfig workersConfig="FULL_PATH" /> > > > > > > Starting service Tomcat-Standalone > > > > > > Apache Tomcat/4.1.12 > > > > > > [INFO] Http11Protocol - -Starting Coyote HTTP/1.1 on port 8080 > > > > > > [INFO] ChannelSocket - -JK2: ajp13 listening on tcp port 8009 > > > > > > [INFO] JkMain - -Jk running ID=0 time=1/13 > > > > > > config=/usr/local/tomcat/conf/jk2.properties > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2002-11-08 at 21:20, Turner, John wrote: > > > > > > > > > > > > > > Strange. Are permissions correct? > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > From: .: B i g D o g :. [mailto:bigdog@;venticon.com] > > > > > > > > Sent: Friday, November 08, 2002 9:12 AM > > > > > > > > To: Tomcat Users List > > > > > > > > Subject: RE: Apache + Tomcat Installation > > > > > > > > > > > > > > > > > > > > > > > > That is the weird thing...i do not get the auto directory > > > > > > created... > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2002-11-08 at 21:07, Turner, John wrote: > > > > > > > > > > > > > > > > > > Looks just fine to me. You should be getting a > > file called > > > > > > > > mod_jk.conf in > > > > > > > > > $CATALINA_HOME/conf/auto. > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > From: .: B i g D o g :. [mailto:bigdog@;venticon.com] > > > > > > > > > > Sent: Friday, November 08, 2002 9:04 AM > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > Subject: RE: Apache + Tomcat Installation > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yep, I added all of those in step 3. > > > > > > > > > > > > > > > > > > > > Here is what i have: > > > > > > > > > > > > > > > > > > > > <Server > > > > className="org.apache.catalina.core.StandardServer" > > > > > > > > > > port="8080" > > > > > > > > > > debug="9" shutdown="SHUTDOWN"> > > > > > > > > > > <Listener > > > > > > > > className="org.apache.ajp.tomcat4.config.ApacheConfig" /> > > > > > > > > > > <Listener > > > > > > > > > > > > > > className="org.apache.catalina.mbeans.ServerLifecycleListener" > > > > > > > > > > debug="0"/> > > > > > > > > > > <Listener > > > > > > > > > > > > > > className="org.apache.catalina.mbeans.GlobalResourcesLifecycle > > > > > > > > > > Listener" > > > > > > > > > > debug="0"/> > > > > > > > > > > > > > > > > > > > > Do I need all three? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Then for Host if have: > > > > > > > > > > <Host > > className="org.apache.catalina.core.StandardHost" > > > > > > > > > > appBase="webapps" > > > > > > > > > > > > mapperClass="org.apache.catalina.core.StandardHostMapper" > > > > > > > > > > liveDeploy="true" autoDeploy="true" > > > > > > > > > > > > configClass="org.apache.catalina.startup.ContextConfig" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > errorReportValveClass="org.apache.catalina.valves.ErrorReportValve" > > > > > > > > > > debug="0" deployXML="true" > > > > > > > > > > > > contextClass="org.apache.catalina.core.StandardContext" > > > > > > > > > > unpackWARs="true" name="pclnxrhunter"> > > > > > > > > > > <Listener > > > > > > > > > > > > className="org.apache.ajp.tomcat4.config.ApacheConfig" > > > > > > > > append="true" > > > > > > > > > > forwardAll="false" /> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The only difference is that i am running my tomcat on > > > > > > port 8080... > > > > > > > > > > > > > > > > > > > > also i made sure that host name = httpd.conf > > ServerName... > > > > > > > > > > > > > > > > > > > > I also check to make sure that i only have one > > > > Host section... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2002-11-08 at 20:58, Turner, John wrote: > > > > > > > > > > > > > > > > > > > > > > Check Step 3 after building the connectors in the > > > > > > > > > > HOWTO....you have to stick > > > > > > > > > > > a couple Listener elements into server.xml, one > > > > inside the > > > > > > > > > > Server container > > > > > > > > > > > and one in the Host container (actually one in > > > > each Host > > > > > > > > > > container, but the > > > > > > > > > > > default install only has one Host defined). > > > > > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > From: .: B i g D o g :. > > [mailto:bigdog@;venticon.com] > > > > > > > > > > > > Sent: Friday, November 08, 2002 8:49 AM > > > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > > > Subject: RE: Apache + Tomcat Installation > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thats fine...when i fire up tomcat, i do > > not get the > > > > > > > > mod_jk.conf > > > > > > > > > > > > file...how, can i get tomcat to create that > > > > file for me? > > > > > > > > > > > > > > > > > > > > > > > > Tomcat runs just great and i can run the > > examples and > > > > > > > > > > everything. I > > > > > > > > > > > > followed all the instructions from: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.johnturner.com/howto/apache1-tomcat404-howto.html > > > > > > > > > > > > > > > > > > > > > > > > the only problem is that when i start apache > > > > i get the > > > > > > > > > > > > following error: > > > > > > > > > > > > > > > > > > > > > > > > fopen: No such file or directory > > > > > > > > > > > > httpd: could not open document config file > > > > > > > > > > > > /usr/local/tomcat/conf/auto/mod_jk.conf > > > > > > > > > > > > /usr/local/apache/bin/apachectl start: > > httpd could > > > > > > > > not be started > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2002-11-08 at 20:45, Turner, John wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Not with mod_jk as I understand it. You need > > > > > > mod_jk2 for > > > > > > > > > > > > that, which is a > > > > > > > > > > > > > little different setup for the .properties file. > > > > > > > > > > > > > > > > > > > > > > > > > > Unfortunately, I don't have any HOWTOs for JK2, > > > > > > as I don't > > > > > > > > > > > > use it (yet), but > > > > > > > > > > > > > there are others out there, like this one from > > > > > > > > Robert Sowders: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ftp://pokey.wr.usgs.gov/pub/rsowders/Apache2_Jk2_TC4.1.x_JSDK1.4.x.zip > > > > > > > > > > > > > > > > > > > > > > > > > > It's for Windows, but aside from the pathnames > > > > > > it should be > > > > > > > > > > > > just about > > > > > > > > > > > > > identical. You would also need to upgrade to > > > > > > Apache 2, I > > > > > > > > > > > > don't believe > > > > > > > > > > > > > anyone has JK2 working with Apache 1.3, > > but I could > > > > > > > > be wrong. > > > > > > > > > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > From: .: B i g D o g :. > > > > [mailto:bigdog@;venticon.com] > > > > > > > > > > > > > > Sent: Friday, November 08, 2002 8:30 AM > > > > > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > > > > > Subject: RE: Apache + Tomcat Installation > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > John, > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for all the help... > > > > > > > > > > > > > > > > > > > > > > > > > > > > One question still remains...can Apache fire > > > > > > up tomcat so > > > > > > > > > > > > > > that i do not > > > > > > > > > > > > > > have to start tomcat then apache? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2002-11-08 at 19:23, Turner, > > John wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Pick yer poison: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.johnturner.com/howto > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You can skip most of it...you've got things > > > > > > > > installed and > > > > > > > > > > > > > > built. That said, > > > > > > > > > > > > > > > scroll down to the section after the gray > > > > > > "building the > > > > > > > > > > > > > > connectors" section > > > > > > > > > > > > > > > and you'll see the exact steps > > needed to make > > > > > > > > > > > > > > http://localhost/examples work > > > > > > > > > > > > > > > via Apache and mod_jk. There aren't many. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You've got a lot going on in that > > > > > > workers.properties > > > > > > > > > > > > > > file...you don't need > > > > > > > > > > > > > > > load-balancing at all unless you have > > > > > > multiple Tomcat > > > > > > > > > > > > > > instances, and you > > > > > > > > > > > > > > > also don't need any ajp12 workers > > defined. I > > > > > > > > also don't > > > > > > > > > > > > > > think you can do > > > > > > > > > > > > > > > JNI at all from mod_jk, AFAIK you > > need mod_jk2 > > > > > > > > for that. It > > > > > > > > > > > > > > might help > > > > > > > > > > > > > > > things if you started with a plain vanilla > > > > > > > > > > > > > > workers.properties file, and went > > > > > > > > > > > > > > > from there. Something like: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > worker.list=worker2 > > > > > > > > > > > > > > > worker.worker2.type=ajp13 > > > > > > > > > > > > > > > worker.worker2.host=localhost > > > > > > > > > > > > > > > worker.worker2.port=8009 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ...is all you need to get started. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > From: .: B i g D o g :. > > > > > > [mailto:bigdog@;venticon.com] > > > > > > > > > > > > > > > > Sent: Friday, November 08, 2002 6:38 AM > > > > > > > > > > > > > > > > To: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > Subject: Apache + Tomcat Installation > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > All, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have some questions concerning the > > > > mod_jk for > > > > > > > > > > apache and > > > > > > > > > > > > > > > > getting it to > > > > > > > > > > > > > > > > run. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I moved all the examples for tomcat into > > > > > > my web root > > > > > > > > > > > > > > > > directory and when > > > > > > > > > > > > > > > > i run the examples i get a 404 error > > > > from tomcat. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > What can i do to solve this problem? Any > > > > > > > > good docs out > > > > > > > > > > > > > > there...I have > > > > > > > > > > > > > > > > mulled over apache.org. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Info] > > > > > > > > > > > > > > > > RedHat 7.3 > > > > > > > > > > > > > > > > Apache 1.3.26 (source) > > > > > > > > > > > > > > > > Tomcat 4.1.12 (binary) > > > > > > > > > > > > > > > > mod_jk.so (mod_jk-1.3-noeapi.so - > > > > renamed to > > > > > > > > > > mod_jk.so) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [http.conf] > > > > > > > > > > > > > > > > LoadModule jk_module libexec/mod_jk.so > > > > > > > > > > > > > > > > <IfModule mod_jk.c> > > > > > > > > > > > > > > > > JkWorkersFile > > > > > > > > /usr/local/tomcat/conf/workers.properties > > > > > > > > > > > > > > > > JkLogFile > > /usr/local/tomcat/logs/mod_jk.log > > > > > > > > > > > > > > > > JkLogLevel info > > > > > > > > > > > > > > > > JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " > > > > > > > > > > > > > > > > JkRequestLogFormat "%w %V %T" > > > > > > > > > > > > > > > > JkMount /*.jsp worker2 > > > > > > > > > > > > > > > > </IfModule> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [tomcat's workers.properties] > > > > > > > > > > > > > > > > # Define some properties > > > > > > > > > > > > > > > > > > > > > > workers.apache_log=/usr/local/apache/logs/error_log > > > > > > > > > > > > > > > > workers.tomcat_home=/usr/local/tomcat > > > > > > > > > > > > > > > > workers.java_home=/usr/local/java > > > > > > > > > > > > > > > > ps=/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Define 4 workers, 3 real workers > > > > using ajp12, > > > > > > > > > > ajp13, jni, > > > > > > > > > > > > > > > > the last one > > > > > > > > > > > > > > > > being a loadbalancing worker > > > > > > > > > > > > > > > > worker.list=worker1, worker2, > > worker3, worker4 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Set properties for worker1 (ajp12) > > > > > > > > > > > > > > > > worker.worker1.type=ajp12 > > > > > > > > > > > > > > > > worker.worker1.host=localhost > > > > > > > > > > > > > > > > worker.worker1.port=8007 > > > > > > > > > > > > > > > > worker.worker1.lbfactor=5 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Set properties for worker2 (ajp13) > > > > > > > > > > > > > > > > worker.worker2.type=ajp13 > > > > > > > > > > > > > > > > worker.worker2.host=localhost > > > > > > > > > > > > > > > > worker.worker2.port=8009 > > > > > > > > > > > > > > > > worker.worker2.lbfactor=50 > > > > > > > > > > > > > > > > worker.worker2.cachesize=10 > > > > > > > > > > > > > > > > worker.worker2.cache_timeout=600 > > > > > > > > > > > > > > > > worker.worker2.socket_keepalive=1 > > > > > > > > > > > > > > > > worker.worker2.socket_timeout=300 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Set properties for worker3 (jni) > > > > > > > > > > > > > > > > #worker.worker3.type=jni > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Set worker3 classpath > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > #worker.worker3.class_path=$(workers.tomcat_home)$(ps)classes > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > #worker.worker3.class_path=$(workers.tomcat_home)$(ps)lib$(ps) > > > > > > > > > > > > > > > > tomcat.jar > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Set worker3 tomcat command line > > > > > > > > > > > > > > > > #worker.worker3.cmd_line=-home > > > > > > > > > > > > > > > > > > > > #worker.worker3.cmd_line=$(workers.tomcat_home) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Set worker3 Tomcat/JVM settings > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > #worker.worker3.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$( > > > > > > > > > > > > > > > > ps)classic$(ps)libjvm.so > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > #worker.worker3.stdout=$(workers.apache_log)$(ps)inprocess.stdout > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > #worker.worker3.stderr=$(workers.apache_log)$(ps)inprocess.stderr > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > #worker.worker3.sysprops=tomcat.home=$(workers.tomcat_home) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # Set properties for worker4 (lb) which > > > > > > use worker1 > > > > > > > > > > > > and worker2 > > > > > > > > > > > > > > > > > > > > #worker.worker4.balanced_workers=worker1,worker2 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > .: B i g D o g :. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > > > > -- > > > > > > > > > > > > > .: B i g D o g :. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > > -- > > > > > > > > > > > .: B i g D o g :. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > -- > > > > > > > > > .: B i g D o g :. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > > For additional commands, e-mail: > > > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > > > > > > > > > -- > > > > > > > > > To unsubscribe, e-mail: > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > > For additional commands, e-mail: > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > -- > > > > > > > .: B i g D o g :. > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > To unsubscribe, e-mail: > > > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > > For additional commands, e-mail: > > > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > > > > > -- > > > > > > > To unsubscribe, e-mail: > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > > For additional commands, e-mail: > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > -- > > > > > .: B i g D o g :. > > > > > > > > > > > > > > > > > > > > -- > > > > > To unsubscribe, e-mail: > > > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > > For additional commands, e-mail: > > > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > > > > > -- > > > > > To unsubscribe, e-mail: > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > > For additional commands, e-mail: > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > -- > > > .: B i g D o g :. > > > > > > > > > > > > -- > > > To unsubscribe, e-mail: > > > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > > For additional commands, e-mail: > > > <mailto:tomcat-user-help@;jakarta.apache.org> > > > > > > -- > > > To unsubscribe, e-mail: > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > > For additional commands, e-mail: > <mailto:tomcat-user-help@;jakarta.apache.org> > -- > .: B i g D o g :. > > > > -- > To unsubscribe, e-mail: > <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > For additional commands, e-mail: > <mailto:tomcat-user-help@;jakarta.apache.org> > > -- > To unsubscribe, e-mail: <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> > For additional commands, e-mail: <mailto:tomcat-user-help@;jakarta.apache.org> -- .: B i g D o g :. -- To unsubscribe, e-mail: <mailto:tomcat-user-unsubscribe@;jakarta.apache.org> For additional commands, e-mail: <mailto:tomcat-user-help@;jakarta.apache.org>