I removed that libmod_jk.so symbolic link and re-ran that command it output:
"/usr/local/apache2/build/libtool --silent --mode=install cp mod_jk.la `pwd`/mod_jk.so" But it only re-created the symbolic link. :( --mikej -=----- mike jackson [EMAIL PROTECTED] > -----Original Message----- > From: Turner, John [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 26, 2003 9:25 AM > To: 'Tomcat Users List' > Subject: RE: problems compiling and using mod_jk > > > > What happens if you run make in that directory again? > > John > > > > -----Original Message----- > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, February 26, 2003 12:21 PM > > To: Tomcat Users List > > Subject: RE: problems compiling and using mod_jk > > > > > > I didn't get the configure AC_PROG_CPP error, but here's what > > was output in > > apache-2.0 > > > > # ls -l > > total 3462 > > -rw-r--r-- 1 root sys 2243 Feb 26 09:19 Makefile > > -rw-r--r-- 1 root sys 736 Feb 26 09:19 > > Makefile.apxs > > -rw-r--r-- 1 root root 661 Dec 19 05:52 > > Makefile.apxs.in > > -rw-r--r-- 1 root root 2131 Dec 19 05:52 Makefile.in > > -rw-r--r-- 1 root root 15020 Dec 19 05:52 bldjk.qclsrc > > -rw-r--r-- 1 root root 448 Dec 19 05:52 config.m4 > > -rw-r--r-- 1 root sys 777044 Feb 26 09:20 libmod_jk.a > > lrwxrwxrwx 1 root sys 18 Feb 26 09:20 > > libmod_jk.so -> > > libmod_jk.so.0.0.0 > > lrwxrwxrwx 1 root sys 18 Feb 26 09:20 > > libmod_jk.so.0 -> > > libmod_jk.so.0.0.0 > > -rw-r--r-- 1 root sys 689252 Feb 26 09:20 > > libmod_jk.so.0.0.0 > > -rw-r--r-- 1 root root 70552 Dec 19 05:52 mod_jk.c > > -rw-r--r-- 1 root root 7129 Dec 19 05:52 mod_jk.dsp > > -rw-r--r-- 1 root sys 729 Feb 26 09:20 mod_jk.la > > -rw-r--r-- 1 root sys 102128 Feb 26 09:20 mod_jk.lo > > -rw-r--r-- 1 root sys 98392 Feb 26 09:20 mod_jk.o > > > > I've got a mod_jk.o, but that's not the correct file. It > > looks to me like > > the right one should be libmod_jk.so.0.0.0, but I could be mistaken. > > > > --mikej > > -=----- > > mike jackson > > [EMAIL PROTECTED] > > > > > -----Original Message----- > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, February 26, 2003 9:15 AM > > > To: 'Tomcat Users List' > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > buildconf.sh told me this: > > > > > > libtoolize --force --automake --copy > > > aclocal > > > automake -a --foreign -i --copy > > > autoconf > > > configure.in:24: AC_PROG_CPP was called before AC_PROG_CC > > > > > > Then I ran: ./configure --with-apxs=/usr/local/apache2/bin/apxs > > > > > > Everything went OK, then I ran make. Everything went OK, > > with the final > > > result being: > > > > > > /usr/local/src/jakarta-tomcat-connectors-jk-1.2.2-src/jk/native/ap > > > ache-2.0/. > > > libs/mod_jk.so > > > /usr/local/src/jakarta-tomcat-connectors-jk-1.2.2-src/jk/native/ap > > > ache-2.0/m > > > od_jk.so > > > > > > John > > > > > > > -----Original Message----- > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > Sent: Wednesday, February 26, 2003 12:09 PM > > > > To: Tomcat Users List > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > I tried that, here's the output. For some reason it > > can't find the > > > > webserver. I was playing with the version in "native2", > > it required > > > > the --with-apxs2 option, but I haven't got that one to > > > > compile yet, I'm > > > > getting make errors. > > > > > > > > Configure output... > > > > -------------------------------------------------------------- > > > > -------------- > > > > --------------- > > > > # ./configure --with-apxs2=/usr/local/apache2/bin/apxs > > > > loading cache ./config.cache > > > > checking for a BSD compatible install... > > > > scripts/build/unix/install-sh -c > > > > checking whether build environment is sane... yes > > > > checking whether make sets ${MAKE}... (cached) yes > > > > checking for working aclocal... found > > > > checking for working autoconf... found > > > > checking for working automake... found > > > > checking for working autoheader... found > > > > checking for working makeinfo... missing > > > > checking host system type... i586-sco-sysv5uw7.1.1 > > > > checking build system type... i586-sco-sysv5uw7.1.1 > > > > checking for ranlib... (cached) : > > > > checking for gcc... (cached) gcc > > > > checking whether the C compiler (gcc ) works... yes > > > > checking whether the C compiler (gcc ) is a cross-compiler... no > > > > checking whether we are using GNU C... (cached) yes > > > > checking whether gcc accepts -g... (cached) yes > > > > checking for ld used by GCC... (cached) /usr/ccs/bin/ld > > > > checking if the linker (/usr/ccs/bin/ld) is GNU ld... (cached) no > > > > checking for BSD-compatible nm... (cached) /usr/bin/nm -p > > > > checking whether ln -s works... (cached) yes > > > > loading cache ./config.cache within ltconfig > > > > checking for object suffix... o > > > > checking for executable suffix... (cached) no > > > > checking for gcc option to produce PIC... -fPIC > > > > checking if gcc PIC flag -fPIC works... yes > > > > checking if gcc supports -c -o file.o... yes > > > > checking if gcc supports -c -o file.lo... yes > > > > checking if gcc supports -fno-rtti -fno-exceptions ... yes > > > > checking if gcc static flag -static works... -static > > > > checking if the linker (/usr/ccs/bin/ld) is GNU ld... no > > > > checking whether the linker (/usr/ccs/bin/ld) supports shared > > > > libraries... > > > > yes > > > > checking command to parse /usr/bin/nm -p output... ok > > > > checking how to hardcode library paths into programs... immediate > > > > checking for /usr/ccs/bin/ld option to reload object files... -r > > > > checking dynamic linker characteristics... sysv5uw7.1.1 ld.so > > > > checking if libtool supports shared libraries... yes > > > > checking whether to build shared libraries... yes > > > > checking whether to build static libraries... yes > > > > checking for objdir... .libs > > > > checking for dlfcn.h... (cached) yes > > > > checking whether a program can dlopen itself... (cached) no > > > > creating libtool > > > > loading cache ./config.cache > > > > checking for gcc... (cached) gcc > > > > checking whether the C compiler (gcc -g -O2 ) works... yes > > > > checking whether the C compiler (gcc -g -O2 ) is a > > > > cross-compiler... no > > > > checking whether we are using GNU C... (cached) yes > > > > checking whether gcc accepts -g... (cached) yes > > > > checking for ld used by GCC... (cached) /usr/ccs/bin/ld > > > > checking if the linker (/usr/ccs/bin/ld) is GNU ld... (cached) no > > > > checking for test... (cached) /usr/bin/test > > > > checking for rm... (cached) /sbin/rm > > > > checking for grep... (cached) /sbin/grep > > > > checking for echo... (cached) /usr/local/bin/echo > > > > checking for sed... (cached) /usr/bin/sed > > > > checking for cp... (cached) /sbin/cp > > > > checking for mkdir... (cached) /usr/bin/mkdir > > > > checking for libtool... (cached) /usr/local/bin/libtool > > > > no apxs given > > > > checking for target platform... unix > > > > no apache given > > > > configure: error: Cannot find the WebServer > > > > -------------------------------------------------------------- > > > > -------------- > > > > --------------- > > > > > > > > --mikej > > > > -=----- > > > > mike jackson > > > > [EMAIL PROTECTED] > > > > > > > > > -----Original Message----- > > > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > > > Sent: Wednesday, February 26, 2003 9:02 AM > > > > > To: 'Tomcat Users List' > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > I think the culprit is the --with-apxs option, now that I > > > > think about it. > > > > > > > > > > Apache 1.3: --with-apxs=/path/to/apache/bin/apxs > > > > > > > > > > Apache 2.0: --with-apxs2=/path/to/apache2/bin/apxs > > > > > > > > > > I'm going to try it right now on RH 7.2 for apache 2.0 and > > > > see what's > > > > > what...its been several weeks since I did it and I need > > a refresher. > > > > > > > > > > John > > > > > > > > > > > -----Original Message----- > > > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > > > Sent: Wednesday, February 26, 2003 11:53 AM > > > > > > To: Tomcat Users List > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > I don't see anything in particular, but I might be missing > > > > > > something. The > > > > > > only thing that looked worrisome was the "no apache given" > > > > > > message output > > > > > > from the configure script. But maybe one of you folks will > > > > > > have a clue that > > > > > > I don't. > > > > > > > > > > > > Here's the output from ./configure > > > > > > --with-apxs=/usr/local/apache2/bin/apxs > > > > > > -------------------------------------------------------------- > > > > > > -------------- > > > > > > ---------------- > > > > > > # ./configure --with-apxs=/usr/local/apache2/bin/apxs > > > > > > loading cache ./config.cache > > > > > > checking for a BSD compatible install... > > > > > > scripts/build/unix/install-sh -c > > > > > > checking whether build environment is sane... yes > > > > > > checking whether make sets ${MAKE}... (cached) yes > > > > > > checking for working aclocal... found > > > > > > checking for working autoconf... found > > > > > > checking for working automake... found > > > > > > checking for working autoheader... found > > > > > > checking for working makeinfo... missing > > > > > > checking host system type... i586-sco-sysv5uw7.1.1 > > > > > > checking build system type... i586-sco-sysv5uw7.1.1 > > > > > > checking for ranlib... (cached) : > > > > > > checking for gcc... (cached) gcc > > > > > > checking whether the C compiler (gcc ) works... yes > > > > > > checking whether the C compiler (gcc ) is a > > cross-compiler... no > > > > > > checking whether we are using GNU C... (cached) yes > > > > > > checking whether gcc accepts -g... (cached) yes > > > > > > checking for ld used by GCC... (cached) /usr/ccs/bin/ld > > > > > > checking if the linker (/usr/ccs/bin/ld) is GNU ld... > > (cached) no > > > > > > checking for BSD-compatible nm... (cached) /usr/bin/nm -p > > > > > > checking whether ln -s works... (cached) yes > > > > > > loading cache ./config.cache within ltconfig > > > > > > checking for object suffix... o > > > > > > checking for executable suffix... (cached) no > > > > > > checking for gcc option to produce PIC... -fPIC > > > > > > checking if gcc PIC flag -fPIC works... yes > > > > > > checking if gcc supports -c -o file.o... yes > > > > > > checking if gcc supports -c -o file.lo... yes > > > > > > checking if gcc supports -fno-rtti -fno-exceptions ... yes > > > > > > checking if gcc static flag -static works... -static > > > > > > checking if the linker (/usr/ccs/bin/ld) is GNU ld... no > > > > > > checking whether the linker (/usr/ccs/bin/ld) supports shared > > > > > > libraries... > > > > > > yes > > > > > > checking command to parse /usr/bin/nm -p output... ok > > > > > > checking how to hardcode library paths into > > programs... immediate > > > > > > checking for /usr/ccs/bin/ld option to reload object > > files... -r > > > > > > checking dynamic linker characteristics... sysv5uw7.1.1 ld.so > > > > > > checking if libtool supports shared libraries... yes > > > > > > checking whether to build shared libraries... yes > > > > > > checking whether to build static libraries... yes > > > > > > checking for objdir... .libs > > > > > > checking for dlfcn.h... (cached) yes > > > > > > checking whether a program can dlopen itself... (cached) no > > > > > > creating libtool > > > > > > loading cache ./config.cache > > > > > > checking for gcc... (cached) gcc > > > > > > checking whether the C compiler (gcc -g -O2 ) works... yes > > > > > > checking whether the C compiler (gcc -g -O2 ) is a > > > > > > cross-compiler... no > > > > > > checking whether we are using GNU C... (cached) yes > > > > > > checking whether gcc accepts -g... (cached) yes > > > > > > checking for ld used by GCC... (cached) /usr/ccs/bin/ld > > > > > > checking if the linker (/usr/ccs/bin/ld) is GNU ld... > > (cached) no > > > > > > checking for test... (cached) /usr/bin/test > > > > > > checking for rm... (cached) /sbin/rm > > > > > > checking for grep... (cached) /sbin/grep > > > > > > checking for echo... (cached) /usr/local/bin/echo > > > > > > checking for sed... (cached) /usr/bin/sed > > > > > > checking for cp... (cached) /sbin/cp > > > > > > checking for mkdir... (cached) /usr/bin/mkdir > > > > > > checking for libtool... (cached) /usr/local/bin/libtool > > > > > > need to check for Perl first, apxs depends on it... > > > > > > checking for perl... (cached) /usr/local/bin/perl > > > > > > building connector for "apache-2.0" > > > > > > checking for target platform... unix > > > > > > no apache given > > > > > > creating ./config.status > > > > > > creating Makefile > > > > > > creating apache-1.3/Makefile > > > > > > creating apache-1.3/Makefile.apxs > > > > > > creating apache-2.0/Makefile > > > > > > creating apache-2.0/Makefile.apxs > > > > > > creating common/Makefile > > > > > > creating common/list.mk > > > > > > creating jni/Makefile > > > > > > -------------------------------------------------------------- > > > > > > -------------- > > > > > > ---------------- > > > > > > > > > > > > And here's config.log > > > > > > -------------------------------------------------------------- > > > > > > -------------- > > > > > > ---------------- > > > > > > This file contains any messages produced by compilers while > > > > > > running configure, to aid debugging if configure > > makes a mistake. > > > > > > > > > > > > configure:694: checking for a BSD compatible install > > > > > > configure:747: checking whether build environment is sane > > > > > > configure:804: checking whether make sets ${MAKE} > > > > > > configure:850: checking for working aclocal > > > > > > configure:863: checking for working autoconf > > > > > > configure:876: checking for working automake > > > > > > configure:889: checking for working autoheader > > > > > > configure:902: checking for working makeinfo > > > > > > configure:994: checking host system type > > > > > > configure:1015: checking build system type > > > > > > configure:1035: checking for ranlib > > > > > > configure:1065: checking for gcc > > > > > > configure:1178: checking whether the C compiler (gcc ) works > > > > > > configure:1194: gcc -o conftest conftest.c 1>&5 > > > > > > configure:1220: checking whether the C compiler (gcc ) is a > > > > > > cross-compiler > > > > > > configure:1225: checking whether we are using GNU C > > > > > > configure:1253: checking whether gcc accepts -g > > > > > > configure:1296: checking for ld used by GCC > > > > > > configure:1358: checking if the linker > > (/usr/ccs/bin/ld) is GNU ld > > > > > > configure:1374: checking for BSD-compatible nm > > > > > > configure:1410: checking whether ln -s works > > > > > > ltconfig:603: checking for object suffix > > > > > > ltconfig:604: gcc -c -g -O2 conftest.c 1>&5 > > > > > > ltconfig:776: checking if gcc PIC flag -fPIC works > > > > > > ltconfig:777: gcc -c -g -O2 -fPIC -DPIC conftest.c 1>&5 > > > > > > ltconfig:829: checking if gcc supports -c -o file.o > > > > > > ltconfig:830: gcc -c -g -O2 -o out/conftest2.o > > conftest.c 1>&5 > > > > > > ltconfig:862: checking if gcc supports -c -o file.lo > > > > > > ltconfig:863: gcc -c -g -O2 -c -o conftest.lo conftest.c 1>&5 > > > > > > ltconfig:914: checking if gcc supports -fno-rtti > > -fno-exceptions > > > > > > ltconfig:915: gcc -c -g -O2 -fno-rtti -fno-exceptions -c > > > > conftest.c > > > > > > conftest.c 1>&5 > > > > > > ltconfig:958: checking if gcc static flag -static works > > > > > > ltconfig:959: gcc -o conftest -g -O2 -static > > conftest.c 1>&5 > > > > > > ltconfig:1653: checking if global_symbol_pipe works > > > > > > ltconfig:1654: gcc -c -g -O2 conftest.c 1>&5 > > > > > > ltconfig:1657: eval "/usr/bin/nm -p conftest.o | sed -n -e > > > > > > *[ ]\([BCDEGRST]\)[ ][ ]*\(\ > > > > > > )\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm" > > > > > > ltconfig:1709: gcc -o conftest -g -O2 -fno-builtin -fno-rtti > > > > > > -fno-exceptions > > > > > > conftest.c conftstm.o 1>&5 > > > > > > ltconfig:2488: checking for dlfcn.h > > > > > > ltconfig:2526: checking whether a program can dlopen itself > > > > > > configure:1598: checking for gcc > > > > > > configure:1711: checking whether the C compiler (gcc -g > > > > -O2 ) works > > > > > > configure:1727: gcc -o conftest -g -O2 conftest.c 1>&5 > > > > > > configure:1753: checking whether the C compiler (gcc > > -g -O2 ) is a > > > > > > cross-compiler > > > > > > configure:1758: checking whether we are using GNU C > > > > > > configure:1786: checking whether gcc accepts -g > > > > > > configure:1830: checking for ld used by GCC > > > > > > configure:1892: checking if the linker > > (/usr/ccs/bin/ld) is GNU ld > > > > > > configure:1911: checking for test > > > > > > configure:1948: checking for rm > > > > > > configure:1985: checking for grep > > > > > > configure:2022: checking for echo > > > > > > configure:2059: checking for sed > > > > > > configure:2096: checking for cp > > > > > > configure:2133: checking for mkdir > > > > > > configure:2170: checking for libtool > > > > > > configure:2224: checking for perl > > > > > > configure:2339: checking for target platform > > > > > > -------------------------------------------------------------- > > > > > > -------------- > > > > > > ---------------- > > > > > > > > > > > > --mikej > > > > > > -=----- > > > > > > mike jackson > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > > > > > Sent: Wednesday, February 26, 2003 8:48 AM > > > > > > > To: 'Tomcat Users List' > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > Maybe we should revisit the "bunch of libtoolize > > > > > > errors"...I was able to > > > > > > > ignore them, but perhaps they meant something on your OS. > > > > > > You're using > > > > > > > UnixWare, right? > > > > > > > > > > > > > > What does the configure log/status file say? Anything > > > > suspicious? > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > > > > > Sent: Wednesday, February 26, 2003 11:46 AM > > > > > > > > To: Tomcat Users List > > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > How should I proceed? > > > > > > > > > > > > > > > > --mikej > > > > > > > > -=----- > > > > > > > > mike jackson > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > > > > > > > Sent: Wednesday, February 26, 2003 8:37 AM > > > > > > > > > To: 'Tomcat Users List' > > > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > That's munged up somehow. I've never had to do Step > > > > > > #7, the file > > > > > > > > > that I get > > > > > > > > > resulting from "make" is called mod_jk.so. > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > > > > > > > Sent: Wednesday, February 26, 2003 11:33 AM > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > Subject: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ok, here's what I've done: > > > > > > > > > > > > > > > > > > > > 1) grab latest connector sources > > > > > > > > > > 2) cd $SRC/jk/native > > > > > > > > > > 3) ./buildconf.sh > > > > > > > > > > 4) ./configure > > > --with-apxs=/usr/local/apache2/bin/apxs > > > > > > > > > > 5) make > > > > > > > > > > 6) cd apache-2.0 > > > > > > > > > > 7) cp libmod_jk.so.0.0.0 > > /usr/local/apache2/modules > > > > > > > > > > 8) cd /usr/local/apache2/modules > > > > > > > > > > 9) ln -s libmod_jk.so.0.0.0. mod_jk.so > > > > > > > > > > 10) /usr/local/apache2/bin/apachectl start > > > > > > > > > > > > > > > > > > > > And what I got was: > > > > > > > > > > > > > > > > > > > > 1) bunch of libtoolizer errors, but according to > > > > > > > > > > http://www.johnturner.com/howto I don't have to worry > > > > > > about that. > > > > > > > > > > 2) # bin/apachectl start > > > > > > > > > > Syntax error on line 232 of > > > > > > /usr/local/apache2/conf/httpd.conf: > > > > > > > > > > Cannot load /usr/local/apache2/modules/mod_jk.so into > > > > > > > > server: dynamic > > > > > > > > > > linker: /usr/local/apache2/bin/httpd: > > relocation error: > > > > > > > > > > symbol not found: > > > > > > > > > > ap_content_type_tolower; referenced from: > > > > > > > > > > /usr/local/apache2/modules/mod_jk.so > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --mikej > > > > > > > > > > -=----- > > > > > > > > > > mike jackson > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > To unsubscribe, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > For additional commands, e-mail: > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > To unsubscribe, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > For additional commands, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > To unsubscribe, e-mail: > > > > [EMAIL PROTECTED] > > > > > > > > For additional commands, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > To unsubscribe, e-mail: > > > > [EMAIL PROTECTED] > > > > > > > For additional commands, e-mail: > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > > > > For additional commands, e-mail: > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]