Tom W8JI wrote: > I think you may be selecting the wrong type of source, if you are using > EZNEC. > > In the source-type selection, chose "SI", not "I". A split source places > the source at a segment junction, so you can see current leaving each > terminal of the source. > > I forgot about the SI source. That will effectively place the source at a segment junction. Actually it places two sources in the middle of two adjacent segments and that simulates almost the same thing (insignificant difference if you have sufficient segments). Since the currents are listed at the center of segments, the listing will have the currents at the ends of the two sources, which of course will be the same value you assigned to the source. Current is not allowed to change between those two segments because the currents are forced to be the assigned value.
This won't work if you use the dual voltage source (SV), which effectively places it on a segment end (with enough segments). Because it is implemented as two voltage sources on adjacent segments, the current is allowed to change between the two segments, and you will see a difference in current at the ends of the SV source (assuming an antenna with unsymmetrical currents in each side). None of the NEC sources violate Kirchoff's laws, but the implementation of the SI and SV sources isn't exact and doesn't exactly approximate a real source (for which NEC doesn't allow you to see the actual current at the ends of the source). But why bother, most people know the answer anyway. The problem is just understanding what the numbers mean that the program is giving. Jerry, K4SAV _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK