Can anyone point me to a design for a splitter for sharing a Beverage
antenna between two receivers? This is for Field Day so these are not
optimized Beverages by any means.
Just want to allow the 80/40M stations to share antennas. Nothing fancy.
My thoughts are to just use a CATV "2-Way" splitter at the output of the
Beverage matching transformer and run separate feed-lines to each radio.
I'm pretty sure these things work down to 1 MHz but have not measured
them. I can use the pre-amp in the radio (K3) to compensate for the loss.
Thoughts?
--
73,
Gary K9GS
Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032 http://www.cwops.org
************************************************
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
