On 10/23/2014 3:33 PM, JC wrote:
So watch out is you have Comcast cable modem, it is necessary to choke the cable and the AC cord with FT240 # 31. With this fix ,the noise dropped from s8 to s0 but still audible at Doug receiver.
By now this should be "Ham Radio 101" -- that is, assume that EVERYTHING with a digital clock, and EVERY switching power supply is a noise source, and be prepared to choke them using my RFI tutorial as a starting point. It's also a VERY good move to replace all switching power supplies with a linear supply, or even a linear supply float charging a battery. I'm doing exactly that with cable modem, WiFi Router, CATV box, Internet "radio," etc. In most cities, it's possible to find linear wall warts at second hand stores for a buck or less, and I also buy them at ham flea markets.
And all the gear in my shack (except for computers and power amp), run off my small solar system.
73, Jim K9YC _________________ Topband Reflector Archives - http://www.contesting.com/_topband
