You might consider building a W7IUV preamp. It is a very easy to build boradband preamp that you can build using double sided circuit board in which you can easily cut in the pattern on one side of the circuit board using a Dremel tool, and the opposite side is the ground plane. I created a website to document my builds of this preamp, and here is my website URL in which I provide the artwork for the circuit board, along with parts placement. On my website I also provide a link to the W7IUV website where you can find the most current schematic.
http://sites.google.com/site/rxpreamps/ This preamp can handle very strong input signals without being harmed. Gain approximately 20 to 22 dB. 73, Don (wd8dsb) On Mon, Feb 2, 2015 at 4:08 PM, Andy YO3JR <andyru...@gmail.com> wrote: > Hi, > > > > Can someone recommend me a good preamplifier for the beverage antennas on > 80/160m? > > I found on the market a few like Z10043 Norton Amplifier, KD9SV dual band > preamp, RPA-1 from DX Engineering. > > Anyone familiar with this preamps? > > Looking forward for replies. > > Thanks in advance! > > Best regards, Andy YO3JR > > > > > > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband > _________________ Topband Reflector Archives - http://www.contesting.com/_topband