I have both systems. The DXE 2 element system is 80 and 100 feet from my transmitter antenna, respectively. I have run 1.5 kW for the last several years without any problems, and with no sequencer.
The Hi-Z triangular system is even closer (65') and has never had a problem. YMMV, 73, Bob AA6VB Sent from my iPhone > On Nov 15, 2015, at 9:41 AM, Mike Greenway <k...@bellsouth.net> wrote: > > I have used the HI Z rx system and also the DXE ones. HI Z said in the past > no need for a sequencer to get power off the amps if the xmit ant was close > to the rx system antennas. Close I would say 60 foot. DXE has always > suggested using a sequencer to get power off the amps during xmit. I am > going to be forced to move a DXE system within 65 ft or so of my 160 vertical > and wonder if anyone has had any experience of using the DXE without a > sequencer close to their xmit antenna. Just hate to install one more thing I > could get around but will if absolutely necessary. I know moving it closer > is not an ideal situation but you do what you have to. Any input? 73 Mike > K4PI > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband