You need two tools -- a stripper and a compression tool. Here's a nice,
inexpensive compression tool.
http://www.homedepot.com/p/Klein-Tools-Compact-F-Connector-Compression-Crimper-VDV212-008-SEN/203578631
Here are a couple of strippers similar to what I use.
http://www.markertek.com/product/pal-1255/paladin-1255-2-or-3-level-coaxial-stripper-for-rg58-59-62-rg6
http://www.markertek.com/product/pal-1257/paladin-1257-crimp-stripper
73, Jim K9YC
On Wed,12/16/2015 10:31 AM, Renee K6FSB wrote:
since we are talking installation-----
I need to get a tool for connector installation, any preferences on
tool for installing the connectors? or at least any that should be
avoided as they do not last?
I noted two on epay - the red handled ones ( has stripper and just RG
6 &59 plus some connectors!) and blue handled ones (no stripper but
will handle rg 11 , 6 & 59)
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
