Hi it sounds like SO2R on the same band... Its interresting for me too. I am using one solution in CQ160m in order to use 2nd radio for S&P but its disconnected from antenna and grounded as same as 1st radio in RUN during TX period. So I am curious what other TBers are using...
73 - Petr, OK1RP On Thu, Dec 17, 2015, at 07:06 AM, Bob Kupps via Topband wrote: > Hi I was thinking about using a 3dB splitter and tuning the band with our > second K3 using our HiZ monoband 8 circle while we were calling CQ in the > Stew. The center of the array is located 105 meters from the xmit > vertical, uses 20' elements, the included preamp and 100m of RG6 > transmission line. > Could dangerously high signal levels appear at the unmuted second radio > antenna terminal? What about if the second radio is inadvertently tuned > to the xmit frequency? It would seem impossible if the external antenna > preamps are not damaged...but I'm still a 1R op so I better ask first! > TU 73 Bob HS0ZIA > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband