I'm working on a 160 meter 4-square array. Would like to inquire is the best way to set up the phasing lines is to trench the feed lines 12 - 18 inches deep. Part of the array I'll still have to cut grass don't want to finish the ground system till I know the best way. Doesn't make sense for me to think that I can lay the feed lines over the radials. Radials will be laying on the ground with landscape staples. Each vertical will have approximately 60 quarter wave radials. The verticals will be approximately 90ft tall and 40 ft sloping back to tower. Any suggestions for building the array would be greatly appreciated.
Al W8ALP _________________ Topband Reflector Archives - http://www.contesting.com/_topband