You are not sending your section is the error - or at least the log file doesnt know to add this. It should be N7WS 599 ( your section) AI7H 599 ID and so on. I had a similar problem with another contest but I am not familiar with your logging software so nit sure of a fix but you could run a find and replace in Notepad searching 'N7WS 599' and replacing with 'N7WS 599 (your section)' and resubmit.
Hope that helps Paul On Tue, 6 Dec 2016 at 23:00, Wes Stewart <wes_n...@triconet.org> wrote: > I operated some S&P during the ARRL contest. I'm not a contest op but > wanted to > give the guys I worked some points, so I tried submitting a check log. > > I use DXBase for my logging program so I created an .adif file of the QSOs > and > used ADIF2CABR V.3.10 (C) SP7DQR to make a Cabrillo file. > > When I submitted I saw in part this: > > *ERROR-->*Following QSO errors were found: > > * Sent exchange is missing sec for each QSO > > *WARNING-->*Following QSOs were missing required exchange info. You may > want to > correct these when you resubmit your log. > > * QSO: 1814 CW 2016-12-03 0611 N7WS 599 AA5B 599 NM > copied exchange (sec) is missing > * QSO: 1805 CW 2016-12-03 0231 N7WS 599 AC0W 599 MN > copied exchange (sec) is missing > * QSO: 1815 CW 2016-12-04 1454 N7WS 599 AC7A 599 AZ > copied exchange (sec) is missing > * QSO: 1808 CW 2016-12-04 1307 N7WS 599 AI7H 599 ID > > and so on and so forth. > > So what's the problem? > > Wes N7WS > > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband > _________________ Topband Reflector Archives - http://www.contesting.com/_topband
