Question for the group...
>From a 140 foot freestanding tower, I will suspend 4 pieces of phillystran 90 degrees apart from the top of the tower. Antenna wire will be attached to the phillystran such that verticals will be dropped to create a 4 square. I will have as much vertical length as practical and still obtain the 4 square spacing required -- but the vertical length certainly will not be close to a quarter wave. The intent is to use the verticals as a 4 square. In thinking of ways to increase the electrical length, should I run wire back toward the tower from the top of the vertical section to get the full 1/4 or use a T with wire going back toward the tower and down the phillystran to create a "top hat" effect -- or does it matter? Obviously this is a compromise but hopefully still an effective antenna with directional gain. Thanks in advance for your thoughts. 73, Greg-N4CC _________________ Topband Reflector Archives - http://www.contesting.com/_topband
