Planning on changing from elevated radials to ground mounted radials for my 80 M 4-sq. After twice having to rebuild the elevated radials this past winter from the snow/ice storms it is time to go to the ground. I plan on having the feedpoints on 4x4 posts with the feedpoints 3 up from the ground so they dont get snow covered often.
Looking at the DXEngineering Radial plates. It looks like an easy way to tie the radials together on the ground then run a ground wire up to a box at the feedpoint. Any comments or issues with using these radial plates? Also going to use buried feedlines RG6, ¾ wave with 8 turns through #31 big clamp-on core at the feedpoint. 73, N2TK, Tony _________________ Topband Reflector Archives - http://www.contesting.com/_topband