Hi, Ed, Taking the vertical wire up next to the tree trunk will be fairly lossy. That usually also means that some part of the horizontal wire is going through the tree canopy, which will be further lossy. See k2av.com . Click on the green index button "Place an Inverted L". Also read "Design an Inverted L", "Place an FCP" and "The Loss List". Note the issue with not having trees (or parts of them) "inside the bend" of the L. Read them all with an eye to understanding the loss issues.
There certainly are situations where a variety of local constraints will make the most efficient method otherwise inadvisable, e.g. wire in neighbor's tree not being seen. :>)) Oh, what an enormous advantage are great relations with the neighbors! But, while you are the only one who really knows what you can and can't get away with, if you know what causes RF loss in an antenna, then you are also the only one who can muse on the problem for a while and invent a variation in the arrangement that stays within your local restraints **and** avoids most or all of the loss. Let me know off-reflector if you want to discuss this over the phone. That is sometimes a lot more direct and far less time consuming than email. In any event, good luck with it & 73, Guy K2AV On Sun, Sep 23, 2018 at 1:39 AM Edward via Topband <[email protected]> wrote: > Has anybody snaked a wire up a tall tree trunk to make an Inv L? > > Any interaction? Success?? Has to be stealthy because the tree os my > neighbor's :-) > > Thanks, > Ed NI6S > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband > _________________ Topband Reflector Archives - http://www.contesting.com/_topband
