Hi Dick, This looks like a pretty go launcher for putting lines over trees. I've only seen them while watching some youtube videos of the tree cutting/pruning arborist and never knew where to buy them. Checking out the site I requested a catalog but am a bit turned off by the high prices. My air canon does a pretty good job but I suspect the one you show could be more accurate with it's direction control. Thanks for the post, I'm sure others will be interested too.
Terry KI7M > On November 29, 2018 at 10:46 AM Dick Bingham <[email protected]> wrote: > > > I use a "Big Shot" arborist slingshot to install my wire antennas from tall > Fir and Cottonwood trees. > > Check it out here ===> > *https://www.sherrilltree.com/sherrilltree-big-shot-standard-kit > <https://www.sherrilltree.com/sherrilltree-big-shot-standard-kit>* > > You can launch a 3/4-inch pipe elbow over 100+foot high trees with height > to spare. > This is not a wimpy-ass system and can hurl some strong messenger-line > twine > over the trees with ease even during serious winds. > > Use an open-face style spool/roll of messenger line that allows the line to > 'pay-out' > off the end of the spool, or like a spin fish-casting reel, without having > to reel-off by spinning the spool. I usually stab a rod into the ground so > it points toward the selected tree and insert the roll of twine onto the > rod so the line can be launched > with minimal off-axis drag. > > Painting the pipe-elbow/whatever *International-Orange* saves LOTS of > search time when using nearly invisible fishing line and you are working > alone! > > 73 Dick/w7wkr > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
