Did he same. Since this change no problem anymore. Confirming what Greg
says and can only recommend - throw away all PLs and go to N!
73,
Martin, OK1RR
Dne 06. 12. 18 v 5:00 Greg-zl3ix napsal(a):
I continue to be mystified by the fact that the amateur radio
community insists on using PL259 connectors. N-type are much more
reliable (used by professional communicators), low cost, can be crimped
easily and quickly and have a well-defined impedance right up into GHz
frequencies.
Back in 2005 I started having contact problems with the
connector on my SteppIR 3-element. There was a thin layer of oxide that
built up around the centre pin of the PL259. I had had similar problems
with other connectors around my shack. I decided to change my entire
station, including the SteppIR, to N-type, and have never looked back.
73, Greg, ZL3IX
On 06.12.2018 13:29, Steve Ireland wrote:
G'day
About five years I discovered this fool-proof and brilliant
way to solder PL-259s invented by Bill Maxon N4AR who taught this to Tim
K3LR. Tim uses this method throughout his contest station and did a
great job of documenting it - see http://www.k3lr.com/engineering/pl259/
[1] and it has totally changed my angry and worried attitude towards
soldering PL-259s.
The key component is Amphenol 83-1SP connectors.
The connector body is silver and the shell is nickel and you can buy
them from Mouser or DX Engineering.
Vy 73
Steve, VK6VZ
---
This email has been checked for viruses by Avast antivirus
software.
https://www.avast.com/antivirus [2]
_________________
Searchable Archives: http://www.contesting.com/_topband [3] - Topband
Reflector
Links:
------
[1]
http://www.k3lr.com/engineering/pl259/
[2]
https://www.avast.com/antivirus
[3] http://www.contesting.com/_topband
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
