Hi Sam, In my remote base loading box I used relays AD5X specified in one of his articles on a matching network. They might be over kill for your project as they are 3PDT relays. The relays are Deltrol Controls part number 21014-81. They come in various mounting configurations:
- 375F: Flange cover - 375TM: Top mount cover - 375P: Printed circuit terminals I use the 375M version. You might look and see what other relays Deltrol Controls offers. Just FYI, Don (wd8dsb) On Thu, Dec 6, 2018 at 1:36 PM Sam Josuweit <sam...@epix.net> wrote: > No > > > > From: Mike Waters [mailto:mikew...@gmail.com] > Sent: Thursday, December 06, 2018 12:02 PM > To: Sam Josuweit > Cc: topband > Subject: Re: Topband: Recomended Relays > > > > You're not planning on hot-switching it, are you? That's hard on > amplifiers. :-) > > > > 73, Mike > > www.w0btu.com > > On Thu, Dec 6, 2018, 10:48 AM Sam Josuweit <sam...@epix.net> wrote: > > Can anyone recommend a good general use relay for antenna switching in the > 800-1000w power range? I know using power relays can be a roll of the dice. > > According to modeling peak voltages should be less than 450V. > > > > Thanks > > Sam(N3XZ) > > > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband > Reflector > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband > Reflector > _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector