Would be interested in responses to this query as well. Am planning to erect the 4 el Hi Z with 80 ft spacing in a forested area. Trees are a mix of hard and soft wood. Average heights are 70 ft.
Gut feel is zero impact. Have 4 SQ for TX on both 160 and 80 in woods and seem to work just fine. Regards, Mark, K1RX > On Feb 18, 2019, at 2:56 PM, Mike Fischer <mikebfisc...@comcast.net> wrote: > > Hi all, newb to the topband 160 reflector here so thank you for any coaching > or corrections on protocol… > > I live on a heavily forested (douglas firs - almost all of which are 100’+) > piece of land. > > I have enough room left to put up either an SAL 30 or a 4sq of 20’ verts > with 80’ spacing. HiZ probably > > Problem is regardless of which I choose, there will be at least one or two > trees in the “infield“ and foliage around the edges. > > Any experience with the same or thoughts? Grateful for the coaching please > feel free to reply direct to mikebfisc...@comcast.net > > 73 > K7XH > > Sent from my iPhone > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector