VE9AA: I don't have a tower supported Inverted L, but I have a slightly different way of supporting the center of a 20m 4-square array of inverted L's and wanted something non conductive so I use 1.5" grey electrical PVC conduit and it's stood up many years in a harsh environment with wild temperature swings and all winter can throw at it, but the UV up here is on the lower end of the scale.
Because PVC can get floppy in the heat or with lots of ice buildup, support it from above (from the far end, back to the tower, some distance above the PVC arm) with rope. (think triangulation) If you are located where UV may be an issue, tape it like Jim has said. =================================================== WW3S: I lost my fiberglass pole that I use for a standoff for my inv L off my 50' tower.....second or third time in 12 years or so, victim of the recent ice/snow storm we just had.....I've been using fiberglass to isolate it from the tower.....but the wire for the antenna goes thru an insulator attached to a rope thru a pulley off the fiberglass arm.....should I continue to go with fiberglass, or would metal be ok, since I have the rope and other insulator there.... _________________ Mike VE9AA Mike, Coreen & Corey Keswick Ridge, NB _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector