I have an 80' Rohn 45 tower that I shunt feed. At 85' there is a SteppIR MonstIR. I set it on 7020 when I want to transit on 160M. The setting of the antenna has a dramatic effect on 160M with SWR.
I have side mounted antennas at 45' and 50'. The shunt feed is a set of three parallel #16 enameled wires 18" from the tower face. The shunt runs from 6.5' above ground to 40'. I use a pair of vacuum variable caps as a gamma match to tune the shunt. I also have a third vacuum variable cap and a vacuum relay to switch from low and high 160M. My question - any reason to use a larger gauge wire than #16 for the shunt such as #14 or #12. Would it make a measurable difference? Tnx for any feedback N2TK, Tony _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector