Steve, Older RCS-4 used open-face relays which are more of a problem for relay bounce. Newer RCS-4 use sealed small-signal relays. Getting one of the newer units may solve your problem. 73/Jon
Jon P. Zaimes, AA1K Tower climber for hire http://www.aa1k.us/ Cell: 302-632-2353email: j...@verizon.net or a...@arrl.net -----Original Message----- From: Steve London <n2ica...@gmail.com> To: Topband <topband@contesting.com> Sent: Tue, Feb 22, 2022 1:04 pm Subject: Topband: Relay bounce I am using an Ameritron RCS-4 antenna switch to select between beverage antennas. Recently, it has developed a bad case of relay bounce causing an S9 spike every time I switch between antennas. Any suggestions on how to improve this ? Since it's only used for RX antenna selection, I'm amenable to replacing the relays with something else, although I have had issues before with other relays due to no current going through the contacts. Thanks and 73, Steve, N2IC _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector