Hi
Keep in mind a 1/2 wave vertical feeding inpedance 1-3 Kohm this means
high voltage ?
ON4UN tried on his isolated tover for 164m 40m high to do so on 80 m,
and only worked on low power ?
Ended up with 4 1/4 wave slopers on the top 80m the best vertical will
be a 3/8 wave concerning feeding impedance
73 Boye
On 20-12-2022 21:23, Cecil acuff wrote:
Keep in mind…FAA requires anything over 200’ be registered with them and have
obstruction lighting. If near an airport that elevation may be much lower or
even not allowed. 1/2 wave on 160m…260’+.
Cecil K5DL
Sent from my iPhone
On Dec 20, 2022, at 1:39 PM, Chris Maness <christopher.man...@gmail.com> wrote:
I am wondering what type of kite would produce the most consistent
result for a 1/2 wave vertical. I am thinking 1/2 lamda so that I
don't have to fuss with a radial field.
--
Thanks,
Chris Maness
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector